Problems with washing my JD4310 ePwrReverser

   / Problems with washing my JD4310 ePwrReverser #1  

thedirtdoc

New member
Joined
Mar 27, 2005
Messages
2
Location
Wilderville Oregon
Tractor
JD4310
Have any of you guys ever experienced the following...
Approx. 1-1/2yrs ago developed a problem with my 2005 JD4310. After spraying down the tractor, I literally could not get it to move. I found that if I depressed clutch, left transmission in neutral, and moved the reverser lever from neutral to drive and let out on the clutch, I could hear the hydraulic converter move as if engageing, but as soon as I depressed the clutch again and shifted into a gear, the hydraulic converter would disengage and it would be like I was in neutral (the low-high speed lever was engaged). This went on for a while and finally after things dried out aparently, the unit started to work normally.
About 1yr. ago and repeated calls to the dealer, JD authorized the dealer to replace the wiring harness and all fuses. This corrected the aparent problem temporarily, however after leaving the tractor on my trailor this past weekend during a thunder storm, I went out to unload it and experienced the same problem all over again. Now this tractor is out of warranty and the dealer told me to make sure the battery is disconnected and for me to pull every plug in the system and put some silicone on each connection. HELP!!!
 
   / Problems with washing my JD4310 ePwrReverser #2  
I've had the same problem you're describing.Dealer had no real solution. I think he said "don't get water on the reverser lever or the fusebox."

Sorry I couldn't help more.


Mike Scheer
 

Tractor & Equipment Auctions

Bell B30E (A50123)
Bell B30E (A50123)
UNUSED 20 in. Gasoline Chain Saw (A53117)
UNUSED 20 in...
2021 JOHN DEERE HX14 (A53084)
2021 JOHN DEERE...
Caterpillar 420F2 IT (A53314)
Caterpillar 420F2...
2008 JLG 1930ES ELECTRIC SCISSOR LIFT (A52705)
2008 JLG 1930ES...
2010 Ford Edge SE SUV (A51694)
2010 Ford Edge SE...
 
Top