power beyond question

[jdpfeffer]

Hi,

Is it possible to install power beyond or some other type of auxillary hydraulics on a 2210? I want to use a hyd. dump cart without having to unhook loader hydraulics.
Thanks!

 

[SoloDotCom]

Does the dump cart have it's own control valve? If not you would want to hook up to a hydraulic remote. Power Beyond is for all intents and purpose a tap into the tractor's hydraulics and is usually connected to some device with it's own controls.

 

[fgross335_2210]

I too would like to add a power beyond circuit to my 2210. I know people have tapped the lines/control circuit for the FEL, but this requries fabrication and many searches for the right combination of parts. I don't think Deere offers a kit but I could be wrong.

 

[jdpfeffer]

The one I want to use does not-if one did how would that work? A tap off the SCV?

 

[JerryG]

A power beyond is basically a connection for an other valve. An example of this is the valve on a backhoe. It could be used for the connection for a control valve for the remotes.

 

[jdpfeffer]

ok- so power beyond is not what I want- but an aux hydraulic is. Does JD sell such a thing for 2210? Anyone have any experience with such a thing?

Thanks!

 

[JDFANATIC]

Woods does for their BH, and it is also available separately. I seem to remember like $300 for it. /forums/images/graemlins/tongue.gif

 

[JerryG]

I don't know anything about a JD 2210, but if you will do a search for "remote" you will find more than you wanted to know.

 

[Inspector507]

Now, if Deere has changed the 2210 since last year this may not apply.
But, last year another member here, CHUCKG, had trouble connecting a top and tilt setup via 2 remotes on his 2210. It seems at the time Deere made no provisions for doing this. Jim McCuan at Integration Engineering found a way to do it. Search on the name CHUCKG and read his posts from last year. The Deere dealer said adding remotes could not be done, but in some way it can.