Post Hole Digger stand plans

[CharlieTR]

Anyone know of plans for a stand to hold up a 3-Point PHD? I saw one a long time ago in a catalog but it came with the PHD. I want to build one that can hold up the digger with auger and drive shaft connected (at least I think I do). I have not seen one up close or even a good picture.

Thanks,
Pinched Figures Again

 

[firemanpat2910]

http://www.tractorbynet.com/forums/showthread.php?t=76350&highlight=stand+hole+digger

I dont know how to do a link but choose search feature and use key words
Stand, hole, digger and you will come up with many choices

WOW the link worked ...... horray beer

 

[k7oi]

Amen! The PHD was the most confusing, complicated (& HEAVY) implement I use - I finally built this stand for it:
http://www.tractorbynet.com/forums/showthread.php?t=79999
("Yet another Post Hole Digger support")
No welding required, etc. It works well and is simple. I do take off the auger, however. Have fun!
Terry K7OI

 

[gabby]

Hey Charlie,
Here's the world's cheapest and easiest PHD stand. It consists of 2 old fence posts, a piece of 2x6, some nails, and some rope.
gabby

 

[EddieWalker]

I read this from another poster a few years ago and have found it to be very good advice. Sorry I forget who it was.

Just drill the bit into the ground about a foot.

I was worried that water will fill up the hole when it rains, but I've been doing it over a year now and only what falls into the hole gets in there. Runnoff goes around the hole because of the burm created by drilling the hole.

I have plans for a proper stand that I'll be able to keep it under roof, but that's kind of low on my list of things to do.

Hanging it from a tree or some other overhang works too.

Eddie

 

[WVBill]

Here's what I rigged up

http://www.tractorbynet.com/forums/attachment.php?attachmentid=56882&d=1151064367

 

[firemanpat2910]

Gabby mine is even cheaper than yours. I tie mine to a V in a tree trunk. works ok but when I get the time I will make a post stand. I guess if I keep using the tree I can justify a taller tractor every couple of years.

 

[Justaplain]

I slip the auger off, makes it much easier to handle. bcs