Post Hole Digger Seals

[paul dyar]

I am having trouble finding seals for a post hole digger. The make is unknown. The input shaft is 1.25 the od of the seal is 1.75 The output shaft is 2.0 the od of the seal is 2.6250. I have called 2 places and been on Timken site. So far no luck. The number on the cap is 901212250222.
Thanks for any help,
Paul

 

[SPYDERLK]

Grease.

 

[mlauk]

I bought an odd size seal from these people once, but I had a number I could read off the old seal. If you could find a chart for seal sizes and cross reference numbers, they might carry it.

SEALS

 

[wdchyd]

Try a local bearing house.....Motion Industries or others.......

Common stuff.....

 

[kevinj]

Try a local bearing house.....Motion Industries or others.......

Common stuff.....

Yep, they cross the number or get it by size.

 

[GE222]

Yes, Definitely check with a local industrial bearing shop. They should be able to supply your needs.

 

[Brad_Blazer]

In your first picture the numbers 50.80 66.75 9.5 are millimeters ID, OD, length.

Look at p/n 5154t45 under metal-rubber shaft seals:
http://www.mcmaster.com/#rotary-seals/=bi0djr

 

[paul dyar]

Thank you Brad. They are ordered.
Paul