Pipe Wrench only option?

   / Pipe Wrench only option? #21  
My FEL lift cylinders on my B7800 started seeping after 19 years. Bought the seal kits but had to build a tool to remove the end caps. Put a 24” breaker bar on the welded nut and had to lean on it almost all my weight to break it loose.

1A64D104-A9CF-4ABF-B778-E3D6D8E0EEC2.jpeg
 
   / Pipe Wrench only option? #22  
@orez Nice!

@marrt You might also look into a large chain wrench, aka chain tongs, or chain pipe tongs. You can get 30-36" versions on Amazon for about $100, but read the fine print, as many aren't really that big.
https://www.amazon.com/Mophorn-36inch-Wrench-Capacity-Plumbing/dp/B07WGNDGYF
(I haven't purchased this version, but it appears to be a 30" handle.)
There are a couple vintage 40"+ ones on eBay at the moment.

All the best,

Peter
 

Tractor & Equipment Auctions

19088 (A55758)
19088 (A55758)
Gravely 42in Zero Turn Mower (A55851)
Gravely 42in Zero...
2017 Dodge Ram SLT (A57024)
2017 Dodge Ram SLT...
2013 F-550 Bucket Truck (A55302)
2013 F-550 Bucket...
Landoll Lowboy Trailer (A55315)
Landoll Lowboy...
NEW 2025 Load Trail 83IN X 14IN Single Axle Utility Trailer (A57024)
NEW 2025 Load...
 
Top