arrow
Super Member
Some of these avatars forum members have are great pictures. I have looked but can find no way to blow them up for easier viewing and I am not sure they have this capability. Does such a way exist?
photo enlargement
- Thread starter arrow
- Start date
- Views: 872
RoyJackson
Rest in Peace
- Joined
- Nov 17, 2001
- Messages
- 23,144
- Location
- Bethel, Vermont
- Tractor
- John Deere 4052R Cab,, Deere 855D UTV, Z920A Zero Turn Mower and assorted implements
You can probably rightclick the image and "save Picture As". Then use an image editor (Irfanview is a nice free one) to enlarge the image. However, the image will be of extremely poor quality (pixelated).
So, if you see an avatar you like, I suggest you just ask the owner to post the original picture (from which the avatar was created).
So, if you see an avatar you like, I suggest you just ask the owner to post the original picture (from which the avatar was created).
ragkar
Platinum Member
- Joined
- May 11, 2007
- Messages
- 818
- Location
- eastern PA-lower Poconos
- Tractor
- JD2320 w/R4 $21,100 w/7.16%off
I do this all the time. As Roy suggests, save the picture on your drive (on my browser I right click on the picture and then use 'save image as') and then improve it with a graphics editor.
But there are limits to the improvements that you can make as you are doubling and more the existing pixels. You can't take a small image an blow it up sixteen times and expect to see more detail. But four times or so are useful.
Of greater importance is the ability to adjust the brightness and contrast. This will bring out details that were in the shadows.
I use this procedure often to look more closely at commercial pictures of products. Sometimes I can read the manufacturers name so that I can go looking elsewhere for a better price.
But there are limits to the improvements that you can make as you are doubling and more the existing pixels. You can't take a small image an blow it up sixteen times and expect to see more detail. But four times or so are useful.
Of greater importance is the ability to adjust the brightness and contrast. This will bring out details that were in the shadows.
I use this procedure often to look more closely at commercial pictures of products. Sometimes I can read the manufacturers name so that I can go looking elsewhere for a better price.
Willl
Elite Member
I've got this setup w/ Firefox.
Just be careful what you wish for.
Just be careful what you wish for.
Last edited:
RoyJackson
Rest in Peace
- Joined
- Nov 17, 2001
- Messages
- 23,144
- Location
- Bethel, Vermont
- Tractor
- John Deere 4052R Cab,, Deere 855D UTV, Z920A Zero Turn Mower and assorted implements
Man!!! That's scary, isn't it???
ragkar
Platinum Member
- Joined
- May 11, 2007
- Messages
- 818
- Location
- eastern PA-lower Poconos
- Tractor
- JD2320 w/R4 $21,100 w/7.16%off
Willl, what addon or plugin are you using with firefox?
Of course you just have enlargement capabilities and not the brightness adjustments that will bring things out of the shadows.
Of course you just have enlargement capabilities and not the brightness adjustments that will bring things out of the shadows.