Permanently Pinned

   / Permanently Pinned #1  

kieramax

New member
Joined
Aug 3, 2013
Messages
7
Location
Port Alberni BC Can.
Tractor
Kubota B20
I am new here and I need a bit of help. I am trying to replace the main swing pins on my BT 750. I have removed the Allen set screws and given it a few good wacks but it won't budge , Do I need to use a porta power or is there a secret trick. I have the new pins and there does not seem to be anything else to keep them from comming out. Thanks in advance.:(
 
   / Permanently Pinned #2  
I just went through this with my backhoe ( different brand). After hours of messing with it using several methods, I was finally able to get it out with a large hammer and 1" drift. My next move was to use a hydraulic cylinder w/ cross tube cut off and try that...... If I owned a porta power, it would have been used after my first attempt to remove it after the initial hammer and drift failed to work..
 
   / Permanently Pinned
  • Thread Starter
#3  
Thanks for the info. I have access to a porta power but was leary of going to that level. thanks again
 

Tractor & Equipment Auctions

2008 Ford F-350 4x4 Pickup Truck (A50323)
2008 Ford F-350...
Kubota 24in Quick Attach Compact Excavator Tooth Bucket (A51039)
Kubota 24in Quick...
2019 CATERPILLAR 308 CR EXCAVATOR (A51242)
2019 CATERPILLAR...
2023 AVANT 735 COMPACT WHEEL LOADER (A51242)
2023 AVANT 735...
Set of AG R4 Wheels and Tires (A51039)
Set of AG R4...
2017 GENIE GTH-636 TELESCOPIC FORKLIFT (A51242)
2017 GENIE GTH-636...
 
Top