Part number needed for Briggs 92500 Engine

[wolfden793]

Hi All,

I'm rebuilding a Briggs 92500 series engine (3105 01) and need a part number for the intake valve bushing. I easily found one for the exhaust, but can't seem to locate a part number for the intake side. No bushing in there now; valve loose and needs a bushing. My Briggs maintenance guide shows the replacement bushings, but only if you're taking an old one out and replacing with new. Can anyone help? Thanks in advance!

 

[RandyT]

Intake is 63709 but requires the use of the valve guide reaming kit which has been discontinued.

 

[wolfden793]

Intake is 63709 but requires the use of the valve guide reaming kit which has been discontinued.

Good Morning Randy,

Thanks very much for the part number! The kit you mentioned that was discontinued I have, although I had to buy bits and pieces from several sources to complete the kit. Took awhile to get them all, but at least I'm equipped to do the job. Thanks again and take care.

Jim