Pallets in fields

[TomSeller]

Thought you meant cup size.

Those pallets are kind of flat up front if you ask me.

 

[dragoneggs]

I'm no expert but I would suspect that pallets are unisexual.

 

[Wagtail]

G'day Cobbers! I'm back from my hiatus... And see that the discussion is alive and well.

 

[Xfaxman]

G'day Cobbers! I'm back from my hiatus... And see that the discussion is alive and well.

It's alive, but not sure about well! :laughing:

 

[Paul Thornton]

This thread hasn't been well for a long, long time!

 

[xzcVAbc5]

Looking at recent posts I'm guessing the TBN members were in this forum:

http://www.palletforum.com/tm.asp?m=20333&mpage=1&key=&#20333

 

[blueriver]

Nope .. Not me .. All the info needed regarding pallets is located right here!!!

 

[riptides]

Looking at recent posts I'm guessing the TBN members were in this forum:

http://www.palletforum.com/tm.asp?m=20333&mpage=1&key=佭

What there are other forums on the internet? I would never leave TBN, the knowledge base is too big.

 

[xzcVAbc5]

What there are other forums on the internet? I would never leave TBN, the knowledge base is too big.

I'm sure there's a few heretics in here.

 

[k0ua]

I'm sure there's a few heretics in here.

Bless me Father, for I have sinned. I have been to welding web a few times, and once to the Chevy forum. But that was only after having a few drinks, and feeling really really lonely. :laughing:

 

[TomSeller]

Bless me Father, for I have sinned. I have been to welding web a few times, and once to the Chevy forum. But that was only after having a few drinks, and feeling really really lonely. :laughing:

Consider yourself forgiven unless as a Kioti owner you have been to orangetractortalks.com

 

[Wagtail]

Looking at recent posts I'm guessing the TBN members were in this forum:

http://www.palletforum.com/tm.asp?m=20333&mpage=1&key=佭

Welp, I had a quick peek at that site... and backed away slowly.

I'm going to take a long hot shower now. <shudder>

 

[xzcVAbc5]

Bless me Father, for I have sinned. I have been to welding web a few times, and once to the Chevy forum. But that was only after having a few drinks, and feeling really really lonely. :laughing:

I used to visit WeldingWeb, Hobart Forum, and the Miller Forum (the one I visited most). There's lots of neat welding projects in there.

 

[k0ua]

Consider yourself forgiven unless as a Kioti owner you have been to orangetractortalks.com

Well... I didn't want to talk about it in an open forum.. but I might have peeked in the OTT door, but just once!:laughing: or twice...

 

[GolfAddict]

Well... I didn't want to talk about it in an open forum.. but I might have peeked in the OTT door, but just once!:laughing: or twice...

5 our fathers and 10 Hail Marys for you!

 

[sixdogs]

I have not paid attention to this forum for 234 pages but now I find myself about to clear out the back barn of a bunch of pallets. There is nowhere to temporarily stack them except in the field next to the barn. Should I be concerned?

 

[dragoneggs]

I have not paid attention to this forum for 234 pages but now I find myself about to clear out the back barn of a bunch of pallets. There is nowhere to temporarily stack them except in the field next to the barn. Should I be concerned?

No concerns... but document their activity in the field and report back.

 

[stuckmotor]

I'd happily take those pallets off your hands if they could be beamed to Caroline.

 

[smstonypoint]

I'd happily take those pallets off your hands if they could be beamed to Caroline.

How are you faring during the Big Chill in you part of the Upstate?

Steve

 

[sixdogs]

No concerns... but document their activity in the field and report back.

Funny thing happened. I stacked them pretty high and when I went out later the pile had a slight lean to it. This is where it gets weird because the pile was leaning in the direction of a distant cell tower.