paint color

   / paint color #1  

oakwood

New member
Joined
Jan 29, 2004
Messages
24
Location
penn.
Tractor
kubota 7200
happy new year to all!

im doing some work on my ROPS and need to repaint. its a b7200 kubota. i have the kubota orange, but what is the grey color used on the frame, ROPs, etc.?

thanks,,,oakwood
 
   / paint color #2  
Kubota grey is available at your dealer in spray as well as regular cans. I don't know what an equivalent private brand color would be.
 
   / paint color #3  
When I painted the ROPS on my old B7100 I used Rustoleum Hammered finish paint. It is a dark charcoal and held up well in the woods. Doesn't match the Kubota gray but since it was the roll bar it was not too noticable.

I hope you are using Chevrolet Orange engine spray paint instead of Kubota Orange high dollar spray paint. Same color at 1/2 or 1/3 the price of Kubota's cans and I think it may be even tougher than Kubota paint.

Wish somebody could come up with a shade of blue, that is what Kubota calls that color. I made the dealer give me a free can when I bought the B7510 but that stuff is about $8 a can if you buy it.

Bill Tolle
 
   / paint color #4  
</font><font color="blue" class="small">( I hope you are using Chevrolet Orange engine spray paint instead of Kubota Orange high dollar spray paint. Same color at 1/2 or 1/3 the price of Kubota's cans and I think it may be even tougher than Kubota paint. I made the dealer give me a free can when I bought the B7510 but that stuff is about $8 a can if you buy it.)</font>

For once I have to disagree with you Bill. When I bought my tractor it had a few areas that were pretty scratched up and I wanted to fix them. I bought one of those $8 cans of Kubota Orange II and I couldn't believe how good the results were. I've used Chevy Orange... not on the Kubota, but, I've never used a spray paint that had as good of a finish as the Kubota paint did. All I did was use a little emory cloth to scuff up the paint and smooth out the scratches, I wiped it down with Simple Green to remove any dirt/grease and then I hit it with about 2-3 coats of the Kubota paint. It actually looks like factory paint! The high gloss finish makes it look like it has a few layers of clear coat on it. I'll stand by the Kubota paint.. it definatly worked out great for me! /forums/images/graemlins/cool.gif
 

Tractor & Equipment Auctions

2012 Ford F-550 4x4 Versalift VO36I-01 36ft Insulated Bucket Truck (A52377)
2012 Ford F-550...
2014 VOLVO A25G ARTICULATED DUMP TRUCK (A51406)
2014 VOLVO A25G...
2000 Trail King TK70SA-48.2 T/A 43 Ton Hydraulic Slide Axle Step Deck Trailer (A52377)
2000 Trail King...
HIGH END TRICYCLE SCOOTER (A53843)
HIGH END TRICYCLE...
2010 Ford Edge SE SUV (A51694)
2010 Ford Edge SE...
2004 TRAVIS 48' WALKING FLOOR REFUSE TRAILER (A54607)
2004 TRAVIS 48'...
 
Top