Our new PT425. It’s new day…😊

   / Our new PT425. It’s new day…😊 #1  

Modrob

Gold Member
Joined
May 21, 2020
Messages
259
Tractor
Power Trac
April 10 we took delivery of a new PT425. We drove down to Power Trac and Terry even run it up on the trailer for me. (As most of you know personally, he is a great fellow, and is a walking encyclopedia for Power Trac!😆) He took a lot of time with us on a couple of trips down there and was with us for every detail. Here are a few pics for now:
 

Attachments

  • IMG_8272.jpeg
    IMG_8272.jpeg
    6.5 MB · Views: 202
  • IMG_8273.jpeg
    IMG_8273.jpeg
    5.6 MB · Views: 172
  • IMG_8275.jpeg
    IMG_8275.jpeg
    6.8 MB · Views: 158
  • IMG_8278.jpeg
    IMG_8278.jpeg
    5.8 MB · Views: 147
  • IMG_8279.jpeg
    IMG_8279.jpeg
    5 MB · Views: 139
  • IMG_8280.jpeg
    IMG_8280.jpeg
    4.3 MB · Views: 134
  • IMG_8281.jpeg
    IMG_8281.jpeg
    4.1 MB · Views: 162
   / Our new PT425. It’s new day…😊
  • Thread Starter
#2  
More:
 

Attachments

  • IMG_8282.jpeg
    IMG_8282.jpeg
    4.9 MB · Views: 99
  • IMG_8283.jpeg
    IMG_8283.jpeg
    4.4 MB · Views: 94
  • IMG_8284.jpeg
    IMG_8284.jpeg
    5.3 MB · Views: 88
  • IMG_8285.jpeg
    IMG_8285.jpeg
    4.1 MB · Views: 83
  • IMG_8286.jpeg
    IMG_8286.jpeg
    4 MB · Views: 86
  • IMG_8287.jpeg
    IMG_8287.jpeg
    5 MB · Views: 94
   / Our new PT425. It’s new day…😊
  • Thread Starter
#3  
And a few more:
In the bucket is the auger head and the 9” auger is pictured leaning against some other stuff.
 

Attachments

  • IMG_8291.jpeg
    IMG_8291.jpeg
    5.6 MB · Views: 79
  • IMG_8292.jpeg
    IMG_8292.jpeg
    6.9 MB · Views: 89
  • IMG_8293.jpeg
    IMG_8293.jpeg
    8.1 MB · Views: 94
  • IMG_8294.jpeg
    IMG_8294.jpeg
    5.4 MB · Views: 110
  • IMG_8295.jpeg
    IMG_8295.jpeg
    6.5 MB · Views: 84
   / Our new PT425. It’s new day…😊 #4  
What are your plans of use for this little dude?
 
   / Our new PT425. It’s new day…😊 #5  
When are you going to remove all of that good stuff from the new unit and install it in the old carcass? :ROFLMAO:

Congrats!!! (y)
 
   / Our new PT425. It’s new day…😊
  • Thread Starter
#7  
When are you going to remove all of that good stuff from the new unit and install it in the old carcass? :ROFLMAO:

Congrats!!! (y)
Uh…I’d like to live a little longer 😆(wife wouldn’t see it my way at all LOL)
 
   / Our new PT425. It’s new day…😊
  • Thread Starter
#8  
What are your plans of use for this little dude?
Honestly, don’t know just yet. Depends on what wife decides. (It was hers long before I came into her life 😉)
 
   / Our new PT425. It’s new day…😊 #9  
Did Terry say 50 hours of light break in for the seals, etc before going crazy?
 
   / Our new PT425. It’s new day…😊 #10  
Did Terry say 50 hours of light break in for the seals, etc before going crazy?
What I have been told is at least 20 hours at a maximum of half throttle / speed and pressure is the general recommendation for hydraulic pumps and motors.

To my knowledge, Kohler is silent on break in procedures, and starts with a 100 hour oil change, though I know many who change the oil sooner than 100 hours on new Kohlers. I just would not use synthetic oil until the engine has run 100 hours on non-synthetic oil.

However, I defer to experts and learned spouses on these matters.

@Modrob congratulations again on the new tractor, and thanks for the photos.

All the best,

Peter
 

Tractor & Equipment Auctions

2019 Bobcat T590 Compact Track Loader Skid Steer (A51691)
2019 Bobcat T590...
2007 STERLING T/A DAY CAB ROAD TRACTOR (A51243)
2007 STERLING T/A...
Ford Pickup NR (A50323)
Ford Pickup NR...
2016 KOMATSU D61PXI-23 CRAWLER DOZER (A51246)
2016 KOMATSU...
2002 Freightliner FL70 Elgin Street Sweeper Truck (A51692)
2002 Freightliner...
NEW Wolverine 72'' Skid Steer Tiller (A53002)
NEW Wolverine 72''...
 
Top