Earl rogak
New member
has anyone used an orbit mtr as a pump? I have a few char Lynn motors that I would like to use a pump.In Principle it should work,but as the inlet pressure is ATM,I wonder.
Orbit motor as pump.?
- Thread starter Earl rogak
- Start date
- Views: 4615
Xfaxman
Super Star Member
- Joined
- Feb 8, 2013
- Messages
- 13,298
- Location
- Guthrie, OK
- Tractor
- Toolcat 5610 G - Bobcat V417 - TORO+Loader
What is ATM?
buickanddeere
Super Member
Atmospheric pressure
J_J
Super Star Member
- Joined
- Sep 6, 2003
- Messages
- 18,973
- Location
- JACKSONVILLE, FL
- Tractor
- Power-Trac 1445, KUBOTA B-9200HST
This is an excerpt from Parker Hyd.
The design of a hydraulic motor and a hydraulic pump are very similar. For this reason, some pumps with fixed displacement volumes can may also be used as hydraulic motors.
Hydraulic Motors: Gear Motor, Vane Motor, Piston Motor, Part-turn Actuators
The design of a hydraulic motor and a hydraulic pump are very similar. For this reason, some pumps with fixed displacement volumes can may also be used as hydraulic motors.
Hydraulic Motors: Gear Motor, Vane Motor, Piston Motor, Part-turn Actuators
oldnslo
Super Member
Yes but watch your inlet conditions very carefully. With atmospheric inlet you might be able to run this as a pump at half of its rated RPM.
OP
Earl rogak
New member
Thanks. iguessI will give it a try. earl
OP
Earl rogak
New member
thanks JJ. Parker doesn't mention orbit motors,but I will give it a try
J_J
Super Star Member
- Joined
- Sep 6, 2003
- Messages
- 18,973
- Location
- JACKSONVILLE, FL
- Tractor
- Power-Trac 1445, KUBOTA B-9200HST
Parker link said this, and other data.
Epicyclic Gear Motor
Epicyclic gear motors are also called orbit motors, gear ring motors or gerotor motors. Unlike gear motors, the orbit motor has very low oil leakage. The motor can produce large torques at very slow speeds (approximately 5 rpm).
Excerpt:
Conceptually, a hydraulic motor should be interchangeable with a hydraulic pump because it performs the opposite function - similar to the way a DC electric motor is theoretically interchangeable with a DC electrical generator. However, most hydraulic pumps cannot be used as hydraulic motors because they cannot be backdriven. Also, a hydraulic motor is usually designed for working pressure at both sides of the motor.[1]
This kind of motor can be used as a pump or motor.
0.45 cu in MGG20020-BA1B3 HYD MOTOR SIDE PORTS
Epicyclic Gear Motor
Epicyclic gear motors are also called orbit motors, gear ring motors or gerotor motors. Unlike gear motors, the orbit motor has very low oil leakage. The motor can produce large torques at very slow speeds (approximately 5 rpm).
Excerpt:
Conceptually, a hydraulic motor should be interchangeable with a hydraulic pump because it performs the opposite function - similar to the way a DC electric motor is theoretically interchangeable with a DC electrical generator. However, most hydraulic pumps cannot be used as hydraulic motors because they cannot be backdriven. Also, a hydraulic motor is usually designed for working pressure at both sides of the motor.[1]
This kind of motor can be used as a pump or motor.
0.45 cu in MGG20020-BA1B3 HYD MOTOR SIDE PORTS
