OOPS.......I goofed

   / OOPS.......I goofed #1  

waynokakid

Silver Member
Joined
Oct 6, 2005
Messages
196
Location
missouri ozarks
Tractor
Yanmar F16D
The ring gear that I replaced, has been trashed. Not sure how I did it, operator error, or not replacing the pinion along with it. As was strongly suggested here on TBN. Being a tractor owner newbee, I didn't want to get into the tranny and a buddy who is some what of a shade tree mechanic thought it (pinion gear) would polish and match up with use. Some of the teeth are almost flat. Nothing else was damaged, just the ring gear. So I am needing another ring gear and pinion. Cause this time I will change pinion gear also. Have exhausted all the leads that were suggested to me. If anyone knows where I might look, or has a F16D that is parts. I would be beholding to ya....pm me if you need too.
 
   / OOPS.......I goofed #2  
My guess is that the backlash was incorrect for the two gears. That or maybe the the gears were different ratios. Either way, it would behoove you to take the time and do a proper setup. Get the dial indicator, pattern grease and shims and do a proper gear setup.
 

Tractor & Equipment Auctions

2010 Ford Edge SE SUV (A51694)
2010 Ford Edge SE...
2007 IC Corporation PB105 Passenger Bus (A51692)
2007 IC...
Manac Walking Floor Trailer (A50322)
Manac Walking...
JOHN DEERE 1725 CCS (A53084)
JOHN DEERE 1725...
2018 International Durastar 4300 Forestry Chipper Bucket Truck (A51692)
2018 International...
2019 FORD F-650 SUPER DUTY BOX TRUCK (A51406)
2019 FORD F-650...
 
Top