Off-roading term escapes me.

/ Off-roading term escapes me. #1  

jmc

Elite Member
Joined
Jul 21, 2003
Messages
3,204
Location
SW Indiana
Tractor
Ford 1920 4x4 (traded in on Kubota). Case 480F TLB w/4 in 1 bucket, 4x4. Gehl CTL60 tracked loader, Kubota L4330 GST
Hello,

What is that term for getting stuck by going over too steep of a bump and bottoming out on the frame between the axles? (Seems like it was "high-something".) Usually the missing words pop up later. Not this time.
 
/ Off-roading term escapes me. #3  
Yep. High center, centered.
 
/ Off-roading term escapes me.
  • Thread Starter
#5  
That's it! Thanks, guys.
 
/ Off-roading term escapes me. #6  
And now we wait for the rest of the story.
Surely there is a story of JMC getting hung up on something, right?
 
/ Off-roading term escapes me.
  • Thread Starter
#7  
And now we wait for the rest of the story.
Surely there is a story of JMC getting hung up on something, right?

I've had my share of off-road stunts/broken bones over the years (Jeeps, dirt bikes, and now, tractors) but never high-centered badly enough to need extraction. We had a phantom vandal trashing yards and other places not meant to be driven on. I saw a guy in a Toyota mini-truck high-centered on private stone mill property and it was probably the vandal. Couldn't think of that word at the time.
 
/ Off-roading term escapes me. #9  
High centered, or turtled. Although turtled can sometimes be upside down, too.
 

Marketplace Items

Pallet of Four Pivot Wheels & Tires (A62177)
Pallet of Four...
2018 RoGator 1100C (A61307)
2018 RoGator 1100C...
VAC PUMP MUFFLERS QTY 5 (A60736)
VAC PUMP MUFFLERS...
HYDRAULIC THUMB CLAMP FOR MINI EXCAVATOR (A58214)
HYDRAULIC THUMB...
UNKNOWN TANK MANIFOLD (A58214)
UNKNOWN TANK...
Hydraulic rail grinder (A61307)
Hydraulic rail...
 
Top