OEM Fluid Filters for Yanmar 276D
- Thread starter Teeny Greeny
- Start date
- Views: 9249
-
- Tags
- yanmar 276d
CoyPatton
Veteran Member
- Joined
- Aug 10, 2015
- Messages
- 1,569
- Location
- Poplar Bluff, MO
- Tractor
- Yanmar YM2002D with Koyker 110 FEL
Thanks Winston. As always you are a wealth of knowledge and resources.
OP
Teeny Greeny
Member
Thank you Winston1, I appreciate the help. Is 31 the screen? Is this screen usually cleaned rather than changed? I will try and look at it tomorrow. Thanks again!
Yes and it is cleanable. Looks like this. HYDRAULIC OIL SCREEN: Yanmar Tractor Parts
You also have a spin on hydraulic filter: HYDRAULIC FILTER - SPIN ON - S: Yanmar Tractor Parts
OP
Teeny Greeny
Member
I'm glad to hear it's cleanable! I bought the Filter, it came up as a Baldwin B2 at my local Tractor store. I'll have to take a peek and see if the screen is accessed easily. If not I may wait for my help to return. Thanks again!
kenmac
Super Member
- Joined
- Feb 13, 2005
- Messages
- 9,833
- Location
- The Heart of Dixie
- Tractor
- McCormick CX105 Kubota MX 5100 HST, Kubota ZD1021, Kawsaki Mule 4010 trans 4x4
just an FYI.. Before you pull that cover to access that filter screen. Drain your HYD oil
If you remove that cover with HYD oil in the tractor, You'll be covered in oil, as it will all come out at once when you pull that cover
If you remove that cover with HYD oil in the tractor, You'll be covered in oil, as it will all come out at once when you pull that cover
OP
Teeny Greeny
Member
Thank you, I appreciate the information! Will do! We changed the Oil and Filter today as well as the air filter. I was surprised that the oil filter was actually recent but the hydraulic filter doesn't look like it is too recent. Maybe tomorrow I will get to it but very soon either way!