Not Starting

[skyhook]

On the picture that Dave provided,,
try "boosting" your machine, put the ground cable on a ground,
and "touch" the positive cable on the large nut that goes "into" the starter,,
"BE CAREFUL", this will start or attempt to start your machine
while touching that nut.
If it does start, your battery is good and so is your starter, you then may have a defective solenoid.

 

[Xfaxman]

I just replaced the batterie in my X500 but it still won't start it just clicks

Why did you replace the old battery?

Did you have it tested (at any auto parts place or Walmart)?

Do you have a voltmeter to test with?

Watch this video https://www.youtube.com/watch?v=XhRPLgH6uZg&noredirect=1