Newbie needs help with tractor ID

[Tntneave]

I bought an Iseki tractor yesterday from a nice older couple who didn稚 use much and really didn稚 know much about the tractor. They told me the model was a TS2202f. When I got home and started researching parts and service manuals I found that the TS2202 is a 3cylinder. I am no mechanic but when I open the hood there appears to only be 2 pistons on the block. So unless Iseki designed an engine with the third cylinder under the engine block which I haven稚 found I am guessing they had the wrong model number. After scouring this forum and TractorData.com it looks like the TS**10 tractors are 2 cylinder tractors. Does anyone have any suggestions on how I can determine what model Iseki I bought?? I really want get the manuals and filters so I can service it before I put her to use.

Thanks in advance for any help and/or suggestions.

Tad

 

[Tntneave]

Here are some pics of the tractor.

View attachment 544420View attachment 544421View attachment 544422View attachment 544423View attachment 544424

 

[Thomas]

First off welcome to TBN.
I couldn't open your attachment.

 

[Wolfy]

I could not open the photos either. Personally, I would not let the fact that you have a 2 cylinder bother me. If it is anything like my 2 cylinder Shibaura/Ford, you will find it to be torquey and a real fuel miser.

 

[yomax4]

Lots of pics on the web. If it's what they say it is, Very nice tractor.

 

[JimB1590]

Check the wheelbase. If it's a 2 cyl diesel with a 61.5 in wheelbase its mostly likely (almost certainly) TS2210. If the wheelbase is in the 54 in range its either a TS1910 or TS1610.

 

[freedomlives]

You can also check the model number of the engine. That will be on the lower right side, if you're facing the tractor. The table I have in the manual for TS**10 series shows:

2AA1 goes with TS1610 and TS1910
2AB1 goes with TS2210 and TS2510
3AA1 goes with TS2810
3AB1 goes with TS3510

The first digit indicates whether it is a 2 or 3 cylinder.