New To Me YM1700BD

   / New To Me YM1700BD
  • Thread Starter
#11  
Oh wow California! This is absolutely perfect. Thank you for this info!
 
   / New To Me YM1700BD #12  
Trying to post some but they're too big apparently. Stay tuned! Thanks for the link TractorTYMe! How do you know it's remanufactuiwd? And by whom?
I use a free down load. Search Pic. Resizer. Really easy I have problems also with pics..
1700BD. interesting for sure. Welcome to TBN... YM1700BD 19Hp. 2Cyl. only in 1979? I knew it was rare but just 1 production Yr... How :cool:
 
   / New To Me YM1700BD
  • Thread Starter
#13  
IMG_2390.jpeg
 
   / New To Me YM1700BD
  • Thread Starter
#15  
Finally was able to get a couple
Of pics up. I'd appreciate any and info any of you could pass on to me now that you've seen a couple Of pictures. Happy to put some more up if you'd like to see some specific things. Thanks in advance, again!!
 
   / New To Me YM1700BD #16  
Had to look hard but you can see the Red Yanmar on the Hood side decal. Just before the YM 1700BD. Behind the Loader arm. I have that same Decal for the YM2000 I was able to remove. Intact! Muffler side was in terrible shape. I say 1977. Pretty sure without much doubt your 1979 so that's Org. Very :cool:
 
   / New To Me YM1700BD #18  
Nice location. Not far from Fredricks Equipment which is a big plus. The parts for the YM1700 BD should be well supported by them.
 
   / New To Me YM1700BD
  • Thread Starter
#19  
Had to look hard but you can see the Red Yanmar on the Hood side decal. Just before the YM 1700BD. Behind the Loader arm. I have that same Decal for the YM2000 I was able to remove. Intact! Muffler side was in terrible shape. I say 1977. Pretty sure without much doubt your 1979 so that's Org. Very :cool:
I don't understand why you had to remove the decal?? And you think mines an original 1979? Am I hearing you correctly? Where do you think it would have been imported from when it came to the US?
 
   / New To Me YM1700BD
  • Thread Starter
#20  
Nice location. Not far from Fredricks Equipment which is a big plus. The parts for the YM1700 BD should be well supported by them.
There's a Frederick's in Spokane!? Looks like all are in Alabama?
 

Tractor & Equipment Auctions

Morooka MST 660VD Tracked Dump Truck (A51039)
Morooka MST 660VD...
2020 INTERNATIONAL LONESTAR TANDEM AXLE SLEEPER (A51222)
2020 INTERNATIONAL...
KUBOTA M7040 TRACTOR (A51406)
KUBOTA M7040...
POWER BNG2800IE INVERTER GENERATOR (A50854)
POWER BNG2800IE...
2014 John Deere 8360R MFWD Tractor (A50657)
2014 John Deere...
2018 Vermeer D23X30 S3 Navigator Directional Drilling Machine (A49461)
2018 Vermeer...
 
Top