It was in the Boston CL.
New to me chipper
- Thread starter Tomtint
- Start date
- Views: 4069
It was in the Boston CL.
Baby Grand
Elite Member
- Joined
- Nov 12, 2007
- Messages
- 4,663
- Location
- Windsor, CT.
- Tractor
- Kubotas: L3240GST B2320HST B5100D & G5200H
You got a great deal. I'm a little jelly.
He had it listed for 1460 and I didn't even bother trying to barter. He was happy and I was too. Win/win.
5030
Rest in Peace
- Joined
- Feb 21, 2003
- Messages
- 28,967
- Location
- SE Michigan in the middle of nowhere
- Tractor
- Kubota M9000 HDCC3 M9000 HDC
I guess I did okay. I bought a Jinma WC8 off CL for 1100 bucks. I had to modify it a bit in as much as I'm using my M9000 Kubota for a power source (bit of overkill). I added a Weasler 800 inch pound 2 plat slip clutch on the chipper input as insurance against twisting something.
Was pretty well used. I took out the feed roll and ground the 'teeth' to a sharp V. Got an extra set of beat up knives (that I'll get sharpened at some point). It's the fixed (non rotatable chute), no biggie. I've run logs as big as the opening will take as fast as the feed roll will pull them in but then I'm inputing almost 85 PTO ponies. Running an 8" diameter ash log, the chute is blowing a sold stream of chips. Pretty impressive.
I don't need to run it at 540, I run it about 500 PTO rpm. The original owner drilled vent holes in the backside knife access cover and it blows plenty of air, never clogs and I'm running lots of grapevines and such.
Never thought much about a chipper but we've had burning ordinances put into effect so the chipper is a viable tool now but I didn't want to pay new price so I found this one. Exactly the same as the Woodmax mechanical (economy) chipper. Actually, all the Woofmax parts fit.
bedises, my wife likers aht chips in the flower beds.
