New to me 1850

[agjones]

Thanks in pretty happy with the machine and flail mower costs.

I figured I'd try to max the power from hydro-->gearbox at the cost of a few rpm on this first try... And basically make a complete tractor tool carrier with driveline... It should be close and like a tractor, I'll be able to swap gearbox driven tools but have the forward facing geometry handled already.

If I'm not happy with the power(or the China gearbox implodes) , I can power the belts directly with this or a better matched motor....we'll see how my setup works In practice... I imagine I'll ultimately want to direct drive the most common tractor built tools... Brush flail, power rake, mulcher for me.

I'm planning on a short u joint setup from the hydraulic motor to the gearbox. Motor mounted to a 3pt quick hitch... From there I can pick up any 3pt tool.

 

[ponytug]

Mine was a WoodMaxx TM-86H, with a hydraulic feeder.
I did a direct drive through a semi flexible shock absorbing coupler from a large mower coupled to a surplus center agriculture splined PTO drive, undersized to do about 1100 at WOT on my 1445, so I could run the Deutz at about 1/2 speed.
Full thread is here https://www.tractorbynet.com/forums/power-trac/367819-woodmaxx-tm-86h-adaption.html

All the best, Peter

 

[MossRoad]

I remember that thread. Nice work! :thumbsup:

 

[joshlee]

That's an awesome machine, Agjones!
!

 

[agjones]

Thanks!



Getting inspection by the pit crew mix-up fit.

Couple new lights, a Jumpstart /charge port, 12v outlet, paint. Decal set en route. PT red was clinging to life. So repainted w sail blue, MF gray and alumacoat.

Seat base and flail mower w qa plate went to fabrication today for fit up. Full suspension seat on return along with the sideshifting flail cutter.... Finished pics to come.

 

[woodlandfarms]

Are those twins? You are soooo Doomed.

 

[MossRoad]

I'm drooling! Great find!

Great pic of the pit crew, too!! :thumbsup:

 

[cqaigy2]

Lol, your going to have a lot of help with those two on the job!

 

[agjones]

They've got plenty of machines to entertain them b4 they figure out about child labor law... ;-)

 

[joshlee]

That's an awesome picture! I'll sure they will enjoy the tractor rides!

 

[twin50]

Thanks for the pto conversion homework...alot of auctions coming up....

 

[twin50]

Don't know if this helps but the Aebi TT 77 I bought from American Bulldog was a 45 hp perkins diesel and was able to run a 74" Rears flail with 28 hangers shredding 3 to 4 inches all day long and twice on sunday.