bgalbreath
New member
- Joined
- Nov 21, 2010
- Messages
- 1
- Tractor
- John Deere 5425
Looking for ideas for an arena drag/leveling device
New member
- Thread starter bgalbreath
- Start date
- Views: 426
Hello bgalbreath, welcome to TBN! Glad to see you posting. Hope you enjoy being a member of our community. 
RadarTech
Elite Member
bgalbreath said:
Welcome!
Do a search here for the jake rake..
We have one of the most mature 15 year old young men I know here. And Jake, built one he sells...
Drop him a private message...
Ill have him find you too....
J
RadarTech
Elite Member
His username is johndeere3270
Johndeere3720
Padawan Tractor Learner, Advertiser
- Joined
- Mar 14, 2009
- Messages
- 3,965
- Location
- NW Oregon
- Tractor
- Bobcat T62, MT55, E42R, E10, John Deere 4100
Yeah, i have the Jake Rakes. I specifically designed them on what my competition could not do. What size are you looking for. I currently have 4-6' units but am working on adding 8-12' models to the line up as well as a professional series unit. My grandpa runs his Jake Rake over his arenas daily and I have got lots of comments from various horse trainers that they loved the footing. :thumbsup: I also am offering them in all colors to match the need of the consumer. Plus, my rakes will be considerably less $$$ than the TR3 and Riata rake.
yooper1
Veteran Member
Hello and welcome to TBN
Fred Barbour
Silver Member
- Joined
- Oct 16, 2010
- Messages
- 113
- Location
- East Kootenays, British Columbia
- Tractor
- 2009 Bobcat CT 235
I use two 4 foot drag harrows chained together. The tines are heavy and about 4 inches long and will therefore mess up your base unless you cut them back to about 2 inches. I didn't bother, I just straped a 6 foot piece of ABS piping under the tines ( I used those plastic quick ties) both in the front and the back to raise it up so I only penatrates about two inches. This was supposed to be a temp solution until I cut the tines. That was five years ago, I never got around to cutting the tines as I works very well as is. I have to replace the quick ties every once in awhile when they break.
I had the harrows given to me, old ones seem to pop up everwhere, I used an old 6 foot iron pipe in front to chain them together and a chain from both ends centered by a big hook that attaches to the hitch on the tractor.
The ABS was scrap from a hardware store that had some cracked stuff lying around.
The chain and the plastic straps was the only cost.
Best of all, It does as good or a better job than a pro arena groom!
Fred
I had the harrows given to me, old ones seem to pop up everwhere, I used an old 6 foot iron pipe in front to chain them together and a chain from both ends centered by a big hook that attaches to the hitch on the tractor.
The ABS was scrap from a hardware store that had some cracked stuff lying around.
The chain and the plastic straps was the only cost.
Best of all, It does as good or a better job than a pro arena groom!
Fred
CompactTractorFan
Super Member
Welcome to TBN and be sure to check out the Jake Rake!!!
