New Holland TC45DA hour meter repair/replacement

   / New Holland TC45DA hour meter repair/replacement #1  

VOL54

Member
Joined
Oct 11, 2014
Messages
46
Location
NW Tennessee
Tractor
New Holland TC45DA, John Deere 345
My TC45DA hour meter recently died. I'm assuming that the bottom access panel below the steering wheel would have to be removed to access the meter. Hopefully the upper panel containing the meter would not have to be removed. Until I can access the meter, I don't know if I have a bad/corroded connection or a bad meter. Any way to test this analog meter? Any thoughts or comparable experiences on this? Thanks.
 
   / New Holland TC45DA hour meter repair/replacement #2  
Your tach is electrically driven from a wire from the rear of the alternator. Refer to this thread for more information.
 
   / New Holland TC45DA hour meter repair/replacement #3  
Had the same issue on my TC45DA a while back — turned out to be a corroded connection behind the lower panel, so you're on the right track starting there. I didn’t have to remove the upper panel, thankfully.
 

Tractor & Equipment Auctions

2014 Nissan Rogue Select S SUV (A55853)
2014 Nissan Rogue...
2010 Ford Edge SE SUV (A51694)
2010 Ford Edge SE...
2013 Ford F450 4x4 Crew Cab Little Beaver LS300 Drill Rig Truck (A55852)
2013 Ford F450 4x4...
CATERPILLAR 80" QUICK ATTACH BUCKET (A51406)
CATERPILLAR 80"...
2003 Chevrolet 3500 (A50120)
2003 Chevrolet...
2021 Ver-Mac PCMS-3812 Solar S/A Towable Trailer Message Board (A55973)
2021 Ver-Mac...
 
Top