OP
slharman1
Bronze Member
BTW - is that joystick you bought made for a tractor or did you re-purpose it?
Loader New Grapple Build! Let me know what you think
- Thread starter slharman1
- Start date
- Views: 24692
LD1
Epic Contributor
It was just a universal stick. I took the rubber knob off and threaded the shaft to thread the joystick on.
OP
slharman1
Bronze Member
Well it looks Good
I'm having a hard time finding a used one.
I'm having a hard time finding a used one.
OP
slharman1
Bronze Member
Well,
I am finally moving forward on my grapple build. See attached pictures.
I have one of the quick attach plates tacked together and will check for fit this afternoon.
Then tomorrow I plan on getting it all welded up.
Just waiting for the third function kit to come in along with my cylinder.
Then once it is on my tractor I will measure up for my hoses.
I am finally moving forward on my grapple build. See attached pictures.
I have one of the quick attach plates tacked together and will check for fit this afternoon.
Then tomorrow I plan on getting it all welded up.
Just waiting for the third function kit to come in along with my cylinder.
Then once it is on my tractor I will measure up for my hoses.
LD1
Epic Contributor
Looks like alot of welding ahead of you.
I still think you would have benefited from heavier round pipe. But time will tell.
I still think you would have benefited from heavier round pipe. But time will tell.
OP
slharman1
Bronze Member
Here is the final design, in checking out other builds - even with the 2" schedule 40 pipe for the cross members, having two should make it more than strong enough.
We will see.
We will see.
OP
slharman1
Bronze Member
Oh and it's right at 280lbs
54" long
37" jaw opening
54" long
37" jaw opening
4570Man
Super Star Member
- Joined
- Apr 7, 2015
- Messages
- 18,887
- Location
- Crossville, TN
- Tractor
- Kubota M59, Kubota L3800, Grasshopper 428D, Topkick dump truck, 3500 dump truck, 10 ton trailer, more lighter trailers.
I think heavier pipe was needed.
OP
slharman1
Bronze Member
Several people have mentioned that, the tines are 3/8", i couldn't get any heavier pipe very easily,
I will put it together and try pulling a stump up with it and see how it handles it, i do have two pipes in my design instead of just one like most designs I have seen so we will see if that makes any difference.
I will put it together and try pulling a stump up with it and see how it handles it, i do have two pipes in my design instead of just one like most designs I have seen so we will see if that makes any difference.
