new deck

   / new deck
  • Thread Starter
#21  
Well the first problem with the new deck, besides the lack of a tilt cylinder. The Zero fittings in the spindles come loose, lost one all ready replaced it after cleaning out the dirt out best I could. It seems the counter bore is not large enough to let you get socket on to fully tighten it. I had to grind a 6 point socket down to near the end to get them reasonably tight..... so much for engineering and QC........ Jim
 
   / new deck
  • Thread Starter
#22  
They are staying tight now, glad I caught it right away....... Jim
 
   / new deck
  • Thread Starter
#23  
An other grease fitting fell out, this time out of the pillow block on the roller...... time to visit the dealer. Still no tilt cylinder kit........ Jim
 
   / new deck
  • Thread Starter
#24  
All 1/4 28 grease fittings are not the same, very generous tolerance. Less than a 50% thread.... On a good note I have my tilt cylinder kit installed, Life is good...... Jim
 

Tractor & Equipment Auctions

1996 Ford F-350 Pickup Truck, VIN # 1FTJW35F6TEB40742 (A54865)
1996 Ford F-350...
2008 OVERLAND TANK KILL TRAILER (A52472)
2008 OVERLAND TANK...
2017 Chevrolet Traverse LS SUV (A55853)
2017 Chevrolet...
Case Titan 3530 (A55302)
Case Titan 3530...
7-NEW INJECTION HARNESS (A55745)
7-NEW INJECTION...
(6) New 2x15 E-Track Ratchet Straps (A54865)
(6) New 2x15...
 
Top