New blades today.

[dodge man]

I’m not sure how many hours on these blades, maybe 300 to 400. The left blade of the three was worn the most, I’m not sure why?

 

[RjCorazza]

I tend to cut close to objects with the left side of the deck, and that's the blade that I occasionally hit stuff with.

 

[Mike1955]

If you are right handed you probably turn right the most, making a longer turning radius for the left side. Fact or fiction, I don’t really know but it does add up

 

[Eagle1]

I'm right handed but turn mostly left

Too much NASCAR in my youth?

Discharge is on the right turning left avoids blowing the cuttings into the next path. I'm sure that will get me a lot of corrections, but that is my method

 

[dodge man]

I do turn right, I have a mulching kit so no discharge.

 

[RayIN]

I'm right handed but turn mostly left

Too much NASCAR in my youth?

Discharge is on the right turning left avoids blowing the cuttings into the next path. I'm sure that will get me a lot of corrections, but that is my method

There is only one correct way; getter done.
Which way I turn my ZTR depends upon wind direction.
Dodge man, I don't need a mulcher or bagger. I use Gator Blades, they chop up everything small enough it disappears quickly, kinda spendy though @ $60 for a set of three blades, but they do last 4-5 years.

 

[anomad]

Good reminder @dodge man

My rear finish mower has been leaving a less than perfect cut in some conditions it should have no problem with. Need to crawl under there and check out the blades.

 

[RayIN]

Good reminder @dodge man

My rear finish mower has been leaving a less than perfect cut in some conditions it should have no problem with. Need to crawl under there and check out the blades.

You got a mower on the excavator now?

 

[deserteagle71]

Hey, even your old blades are like new! Here's what old and new looked like when I changed mine. What caused the jagged edges on the old blades is what I can't figure out!