New B3200 Owner

[WyattEarp]

Hello everyone, I'm a new owner of a 2010 B3200 / FEL with 144 hours. I purchased it used from a guy about 90 minutes from me and just towed it back home. I think I got a great deal on it, so the extra drive was worth it.

I just wanted to say hello, because I'm sure I'll be asking questions from time to time!

 

[JRL305]

Welcome to the forum. Tons of good stuff here. I also recently bought a used B3200. So far, no complaints.

 

[kcender]

Welcome to TBN.Congratulations on the tractor,it looks like new.

 

[WyattEarp]

Thanks fellas! The guy I purchased it from was hours away from trading it in on a new MX series, so he basically let me buy it for trade value at $13K with a set of forks included.

 

[buck boost]

That is a great find for 13K. I paid 13.5 for a B2920 w/fel for 13.5K (with 26 hours) last fall and thought I got a good deal.

How smooth does your B3200 idle/run? I did look at a new one at a dealer, and that particular 3200 was a extreme vibrator.

 

[WyattEarp]

I've never owned a tractor before, so not much to compare it to, but it idles very smooth. It feels like a new tractor...

If it would just get warm out now

 

[s219]

That is a great find for 13K. I paid 13.5 for a B2920 w/fel for 13.5K (with 26 hours) last fall and thought I got a good deal.

How smooth does your B3200 idle/run? I did look at a new one at a dealer, and that particular 3200 was a extreme vibrator.

If you're used to a 3-cyl in the 2620/2920, the 4-cyl in the 3200 indeed feels a lot more shaky. It's the inherent nature of 3- versus 4-cyl engines.

 

[jeff9366]

Here is a LINK to Kubota B3200 threads in the T-B-N archive:

LINK:

http://www.tractorbynet.com/forums/search.php?searchid=1468073

 

[buck boost]

I've never owned a tractor before, so not much to compare it to, but it idles very smooth. It feels like a new tractor...

If it would just get warm out now

I hear ya on the weather problem. Glad you got a smooth runner.


Are you after any attachments for your new 3200?

If you're used to a 3-cyl in the 2620/2920, the 4-cyl in the 3200 indeed feels a lot more shaky. It's the inherent nature of 3- versus 4-cyl engines.

I have read that the lil 4 bangers seem to vibe more than the lil 3 bangers. Some 3200's seem to be much worse than others though. I only seen just the one 3200 at the dealer.

The primary reason I purchased the 2920 was availability. I saved bunches just like the OP on going used. :thumbsup: If a 3200 would have come up instead of the 2920, I prolly would have gotten that instead, as long it was a reasonably smooth runner.

 

[coldfingers]

So are the bigger tractors smoother that have the four cylinder engines in them?

 

[buck boost]

My M7040 4 cyl is super smooth at idle. Can't speak for any other models. A few rough spots in the rpm range, but I don't/won't run it there. Some roughness at specific rpms is normal.

 

[WyattEarp]

Hey buck, I'm not looking for any attachments yet. I need to sell toys first!
I would like to buy a tooth bar like the bxpanded piranha

 

[buck boost]

Well don't sell anything you might regret later!!

 

[WyattEarp]

I might shed a tear when this goes, but to make the tractor deal happen, there were strings attached!

 

[JRL305]

The Piranha Tooth Bar is a great addition. I haven't taken mine off since I got it.

 

[WyattEarp]

The Piranha Tooth Bar is a great addition. I haven't taken mine off since I got it.

Great price too. I'd really like to get one ASAP

 

[coldfingers]

WhattEarp,
I sold a kubota rtv 900 also to buy my tractor, know how it goes.