need yoke for New Holland 479

[cowridermi]

I have a New Holland 479 that had the yoke broke on the slip clutch [86500915]. It uses the 47621 u-jount, crosses to Weasler 200-1875, 1-1875 Neapco. I would like to cut the broken yoke off and weld in a new one but have problems finding one to weld on. Does anyone know of a yoke that I can use?

 

[zzvyb6]

Any auto parts store should have a pair of joints you can make use of. Have you tried TSC, Rural King, etc. to find a pair ? as long as you can attach one side, you might as well do the partner.

 

[cowridermi]

I have the u-joint but the problem is that the yoke broke off one side, I need to replace the yoke. TSC has pto yokes but not for this size, nor is it listed in the Weasler catalog.

Bearing Diameter A. 1.00"
Overall Length B. 3-1/8"
Lock Up Dimension C. 2-11/32"
Inside Lock Up

 

[DJ54]

You might try looking at a heavy duty truck supply that repair's pto shafts on dump trucks, etc. They should have may different sizes in stock. Or, maybe see what that unit would be out of a salvage yard. Here's a list of 38 salvaged 479's in various yards on TractorHouse. https://www.tractorhouse.com/listin...-equipment/manufacturer/new-holland/model/479

 

[lightninboy]

How about Neapco 18-7305? Just gotta figure the series and the interchanges.

 

[cowridermi]

Thanks, I order one and will give it a try.