Need measurement on BH92 backhoe attachment

[Herkypilot]

Hi all,
I'm working on converting my 3pt hitch backhoe to a subframe mounted hoe. I have an L3540 and found a subframe kit on ebay that fits this tractor. The subframe I have is made for a BH77 so I am unsure whether it is compatible with the BH92. I don't want to make a custom backhoe attachment to hook up to this subframe so my shortcut is to look at purchasing the Kubota brackets used on the BH92 backhoe side when hooking up to a "cab" tractor. These brackets are $209 each and I want to be sure they fit the subframe I have.

Here's a picture of the subframe I have. What I'm asking for is the distance from the bottom pin to the top pin on a BH92 to see if the Kubota extension brackets will work. I also need the "Pin" size for the top pins. The ones I have that came with the subframe are 1 1/4" in diameter.


Here's the extension bracket mounted on a Kubota BH92 on a cab tractor. I believe this belongs to Waxman.


Tractor side mounted subframe (not mine) and is marked with a yellow line for the measurement I'm looking for. Mine is 12 1/2" measured from bottom of the hole to bottom of the channel.



Thanks,
HP

 

[Wayne64SS]

If I remember I can measure for you tonight bud.

 

[Herkypilot]

Thanks - I appreciate it.

HP