3-Point Hitch Need help with 3 Point Hitch GC2310TLB

[ovmech]

Just bought a GC2310TLB and dropped off the BH to hook up my bush-hog.

When the tractor was dropped off this morn I got a bag of hardware that included what looks like a Loop for the Hyd system.

Is the 3 point independent or do I have to put the loop in?

Is there any instructions anywhere for this? Which lines? I have 3.

I checked the owners manual and adjusted the rate knob as needed and it moved down but will not move back up.

Its a pain trying to hook up the bush-hog first off.... and dang thing weighs a ton.

Will be easier when I get all the rods and connections set and adjusted.

Any help would be great.

Thanks!

 

[67PLY]

The "old tachless" GC2310's just have two hoses to the backhoe......so when I removed ours I just plugged the two hoses together. One the newer style - I really don't know why they have a third hose. Might check with your dealer to see what goes where. Good luck.....enjoy your new tractor. What size is your brush mower??

 

[ovmech]

Yep after a while I figured that one out.

Thanks

 

[ovmech]

Brush Mower is 48"

 

[jeepcj7]

If its a steel loop line, the dealer removed it when he installed your loader valve. Put it on a shelf somewhere.