Need help identifying finish mower

[Tractor_Matt]

First post but long long time lurker. I want to ID this mower so I can see what I have.there are no markings what so ever. It has a left side discharge but cuts good so a little strange to me.
Anybody ever seen one of theses?

 

[chim]

Can't say, but looks like you need to check the oil.

 

[Tractor_Matt]

Well after looking more at it oil is last of my concern it’s a ccw rotation

 

[chim]

Well after looking more at it oil is last of my concern it’s a ccw rotation

That's interesting. I never put the left side discharge together with "backwards" rotation.

 

[Tractor_Matt]

That's interesting. I never put the left side discharge together with "backwards" rotation.

found some ccw blades for it going to try that. but cw rotation from tractor = ccw blade rotation and blade bolt is left hand thread. But there is not a single shred of info on it not even the gearbox, So im shooting from the hip here

 

[chim]

That's even more interesting that it runs CCW with a CW PTO. I bought a B7500 new in 2002 and was sniffing around for a new RFM. There were some mowers that had left-hand discharge but I can't remember what they were.

While I don't recall if there was a choice, I do recall telling the salesman I wanted a right hand discharge because the mowing pattern at the time suited me and it seemed it would be awkward doing everything "backwards" from the previous 10 years.

 

[Grendahl]

My stepdad had a Massy Ferguson 1020 with a belly mower that was CCW rotation and left handed discharge. It was belt driven off a PTO clutch on the front of the engine rather than shaft driven though.

 

[geneP]

I remember being warned that some of the tillers that came on early grey market tractors were ccw rotation.

 

[RandyT]

Mower shows hints of being Rhino. And yes they made left hand discharge. I have a FM72 with left discharge, left hand blades, and left handed blade bolts.

 

[zzvyb6]

Drive shaft is assembled wrong: Out of phase U-joints..

Plus: it's either a front mower using a 3pt type mount, or it's been mounted backwards. The 'front?' of the deck is not open to uncut grass. Si I'd say its intended as a front mount. Some tractors offer a front 3 pt type hitch setup.