You have a way with understatement! If I tried to make that it would take an infinite number of hours. I mean, it is soooooooo hard to strike an arc when welding wood -- I have no idea how you guys do it and with no signs of burn thru!
jb
My Wooden Bulldozer Project
- Thread starter HoyeTractor
- Start date
- Views: 7411
You have a way with understatement! If I tried to make that it would take an infinite number of hours. I mean, it is soooooooo hard to strike an arc when welding wood -- I have no idea how you guys do it and with no signs of burn thru!
jb
tnhomestead
Bronze Member
We use special wood wire feed gas welders to avoid burn thru! The hard part is getting the wood wire to flow thru the nozzle -- needs a special regulator too!
Sweet jobs!!!!
Sweet jobs!!!!
Ductape
Elite Member
Aaron, be careful......... I believe you have the early stages to the disease this guy has !!
Fred Heim's 1/2 Scale Model
Fred Heim's 1/2 Scale Model
sandman2234
Super Member
- Joined
- Dec 4, 2005
- Messages
- 6,663
- Location
- Jacksonville, Florida
- Tractor
- JD2555 and a few Allis Chalmers and now one Kubota
Welding wood with a WIG welder, now I have heard it all...
David from jax
David from jax
ninefinger
Gold Member
Very nice. Mortise and tenon layout had to be a nightmare. Well done, that many m&t joints in one piece, well you can build anything.
Flatheadyoungin
Veteran Member
yeah, i'm impressed......you've got me beat.....pretty badly, i might add!
i think the people you are dealing with, will be able to see the qaulity and uniqness of this..
i think the people you are dealing with, will be able to see the qaulity and uniqness of this..
MarkV
Super Member
- Joined
- Apr 7, 2000
- Messages
- 5,698
- Location
- Cedartown, Ga and N. Ga mountains
- Tractor
- 1998 Kubota B21, 2005 Kubota L39
Add a diesel to the dozer and I'll take one.
MarkV
MarkV
Farmerford
Platinum Member
- Joined
- Dec 9, 2006
- Messages
- 733
- Location
- Columbus, Georgia
- Tractor
- Kuborta B2400, L2900, L4330; Caterpillar D3B, John Deere 455D
Very impressive! I don't have any furniture made that well.
3RRL
Super Member
- Joined
- Oct 20, 2005
- Messages
- 6,931
- Tractor
- 55HP 4WD KAMA 554 and 4 x 4 Jinma 284
Yes, very very impressive.
Your craftsmanship is outstanding. You should really try to sell them, like you said. Even though they're expensive, I'll bet they'll be big sellers!
Your craftsmanship is outstanding. You should really try to sell them, like you said. Even though they're expensive, I'll bet they'll be big sellers!