My Tractors

[duggie]

Hi Guys.
I have been a member for several years but not got around to posting.
I am in Queensland Australia and bought the Ford 3000 used, about 16 years ago.
Used for slashing mainly but its developed hydraulic problems.
Using the search function I am guessing its the filters and not looking forward to pulling the cover
Also the PTO clutch is starting to give problems so I have difficulty getting it into gear. So it needs splitting as well.

I was given this old IH Inter A414 a couple of years ago so thought I would see if I could get it going to take over slashing while I fix the Ford.
I got it started, seems to run OK. PTO clutch works but the main clutch plate is stuck to the flywheel.
I am hoping once I get it mobile I can jerk it free.
More later.
Duggie

 

[Wagtail]

G'day Duggie.

Best of luck with this 'project', Cobber.

 

[duggie]

Thanks.
Many Aussies on here?

I will continue this build up under the McCormick section.

Duggie

 

[greggyy]

Hi...you must have finished now....

 

[duggie]

You are right, I had forgotten all about this. Its been slashing for a few months now.
Some of its here.
http://www.tractorbynet.com/forums/mccormick/338435-austrailian-built-mccormick.html

I will whack another pic in that thread later.
Pulled the top off the Ford box, fixed the hydraulics, and its going now as well

Duggie

 

[greggyy]

I will go read tomorrow, but maybe you can help with some of my questions....or donate your un required A414

http://www.tractorbynet.com/forums/...2-international-a414-aussie-version-b414.html

I am interested in maybe some photos of the handbrake you have, top and bottom (I am sure mine has been totally removed)....will let you post on the thread instead of changing this one.