dodge man
Super Star Member
Good to hear, thanks for the update.
My Industrial Cabin Build
- Thread starter WoodChuckDad
- Start date
- Views: 822628
747driver
Veteran Member
Thanks for the update, I am sure she is happy along with you guys !
OP
WoodChuckDad
Elite Member
- Joined
- Jul 15, 2015
- Messages
- 2,916
- Location
- Free Union, VA
- Tractor
- Kioti RX7320 Power Shuttle Cab, Komatsu PC130-6
Talking, a little high, but alert and well. The sedation hasn’t worn completely off. It is a huge relief to be past the surgery
OP
WoodChuckDad
Elite Member
- Joined
- Jul 15, 2015
- Messages
- 2,916
- Location
- Free Union, VA
- Tractor
- Kioti RX7320 Power Shuttle Cab, Komatsu PC130-6
Mini split mayhem.
dstig1
Super Member
- Joined
- Apr 7, 2010
- Messages
- 5,514
- Location
- W Wisc
- Tractor
- Kubota L5240 HSTC, JD X738 Mower, (Kubota L3130 HST - sold)
Next time you install a cabinet, or anything similar... Make sure you shim behind the points you screw it to the wall. Otherwise it will not be solidly attached. For that bathroom laundry sink, you should have shimmed directly behind those 2 screws. I prefer the composite shims as they don't split like the cedar ones do. Once you have it screwed down and checked level and plumb, then use the multitool to cut off the shim sticking out. You can also use plywood or scraps of lumber the correct thickness. If you have a planer handy, you can make various thicknesses from 1x stock and write the thickness on them so you don't have to measure each time.
airbiscuit
Super Member
- Joined
- Aug 28, 2004
- Messages
- 7,305
- Location
- NW Wisconsin
- Tractor
- New Holland T2310 (40hp), Kubota L3010 GST, New Holland TC21DA *** Previously - Farmall H, 1941 John Deere B, Shibaura SD1500, John Deere 850, Bobcat 642, New Holland 1925
You have been so meticulous on your build. I know it is easy to be a Monday morning quarterback,but are are you going to fill in the gaps in the sheetrock around the water and waste pipes? (I know they are out of sight)
buckeyefarmer
Epic Contributor
I was thinking, he forgot to put the escutcheons on, but I’m not sure I used them inside cabinets. It’s nice the back of cabinet is open. Most of mine has a back, and I had to cut holes for the pipes coming thru.
OP
WoodChuckDad
Elite Member
- Joined
- Jul 15, 2015
- Messages
- 2,916
- Location
- Free Union, VA
- Tractor
- Kioti RX7320 Power Shuttle Cab, Komatsu PC130-6
Yes. With foam.
OP
WoodChuckDad
Elite Member
- Joined
- Jul 15, 2015
- Messages
- 2,916
- Location
- Free Union, VA
- Tractor
- Kioti RX7320 Power Shuttle Cab, Komatsu PC130-6
We successfully completed the Mini split install.
Success! MR Cool 4th Gen DIY Mini Split
Success! MR Cool 4th Gen DIY Mini Split
buckeyefarmer
Epic Contributor
Congrats, I’m considering putting one in my garage.
