dcyrilc
Elite Member
Ah come on. We had a summer last year......
...all 6 days of it.
Besides, I heard we were being anexed into being part of Alaska anyway.:laughing::laughing:
My first tractor (BX25)
- Thread starter Blufrog
- Start date
- Views: 3074
-
- Tags
- kubota bx25
Ah come on. We had a summer last year......
...all 6 days of it.
Besides, I heard we were being anexed into being part of Alaska anyway.:laughing::laughing:
Delphicoder
Silver Member
Congratulations!
You are going to really enjoy it. One tip, as I am sure you may have already read on here, go ahead and order the underside armor from Bro-Tek. Moving brush like that you are bound to sheer the fins off the hyrdo fan without the armor. Money well spent.
You are going to really enjoy it. One tip, as I am sure you may have already read on here, go ahead and order the underside armor from Bro-Tek. Moving brush like that you are bound to sheer the fins off the hyrdo fan without the armor. Money well spent.
JOHNTHOMAS
Super Member
- Joined
- Apr 14, 2008
- Messages
- 7,719
- Location
- Somerset, Ky
- Tractor
- F2690 4WD RTV X1140 MX5400 HST ZD1211
My BX25 came with a Kubota installed fan cover plate that I feel is adequate.
Ya I will look into those plates. My wife found a small bolt maybe 9mm head and about 1 1/4" long out where I was working. It certainly looks like one off the tractor however after crawling all under it and looking around I can't tell where it came from . There is some lock tight on it so I suspect there may have been one of the nylon lock nuts on it that came off or it was not fully tight and spun backwards.
I notice most of the bolts with the nylon nuts on them are all loose. I figure this is from the factory that way instead of using pins they used bolts and left them loose. Mostly on arms of the FEL and BH.
. There is some lock tight on it so I suspect there may have been one of the nylon lock nuts on it that came off or it was not fully tight and spun backwards. I notice most of the bolts with the nylon nuts on them are all loose. I figure this is from the factory that way instead of using pins they used bolts and left them loose. Mostly on arms of the FEL and BH.