My first of many Retaining Walls to tame my slope - DIY
- Thread starter dragoneggs
- Start date
- Views: 40557
cycle_gator
Silver Member
- Joined
- Aug 2, 2009
- Messages
- 243
- Location
- Port Orchard, WA
- Tractor
- Kubota L4310 GST;Case 580 CK (1968)
dragoneggs:
Are you on the water or highway side of the Seabeck Highway? I live south of Port Orchard a ways.
Are you on the water or highway side of the Seabeck Highway? I live south of Port Orchard a ways.
OP
dragoneggs
Super Star Member
- Joined
- Jun 9, 2013
- Messages
- 13,627
- Location
- Seabeck, Washington
- Tractor
- Kubota BX-25D, Kubota Z122RKW-42
Thank you and yes I forgot I had one of those blasted single wheel things... wife pulled it out of the weeds. I am still trying to get her to drive and use the BX but that is a work in progress like the rest of my untamed property. :laughing:Whats the one wheeled contraption in the pen?
Everything looks great! Your hard work was well planned and executed. :thumbsup:
OP
dragoneggs
Super Star Member
- Joined
- Jun 9, 2013
- Messages
- 13,627
- Location
- Seabeck, Washington
- Tractor
- Kubota BX-25D, Kubota Z122RKW-42
Hey neighbor... I am on the hillside but have beach rights and an easement across the road. About a mile before the marina. Absolutely love it here. Beats the big city all day and every day!
ultrarunner
Epic Contributor
- Joined
- Apr 6, 2004
- Messages
- 24,079
- Tractor
- Cat D3, Deere 110 TLB, Kubota BX23 and L3800 and RTV900 with restored 1948 Deere M, 1949 Farmall Cub, 1953 Ford Jubliee and 1957 Ford 740 Row Crop, Craftsman Mower, Deere 350C Dozer 50 assorted vehicles from 1905 to 2006
Great job and inspired my little retaining wall project last Fall...
OP
dragoneggs
Super Star Member
- Joined
- Jun 9, 2013
- Messages
- 13,627
- Location
- Seabeck, Washington
- Tractor
- Kubota BX-25D, Kubota Z122RKW-42
Ha ha... glad all that sweat moved someone else to lift a few blocks! Now if I could only figure out how to install the blocks while sitting on my tractor. :laughing:
ultrarunner
Epic Contributor
- Joined
- Apr 6, 2004
- Messages
- 24,079
- Tractor
- Cat D3, Deere 110 TLB, Kubota BX23 and L3800 and RTV900 with restored 1948 Deere M, 1949 Farmall Cub, 1953 Ford Jubliee and 1957 Ford 740 Row Crop, Craftsman Mower, Deere 350C Dozer 50 assorted vehicles from 1905 to 2006
I found I could do more leaving the heavy lifting to the BX
It wasn't too bad moving the blocks fromt the loader to the wall with both at the same height...
Also a great help moving sacks for concrete to the mixer!
It wasn't too bad moving the blocks fromt the loader to the wall with both at the same height...
Also a great help moving sacks for concrete to the mixer!
OP
dragoneggs
Super Star Member
- Joined
- Jun 9, 2013
- Messages
- 13,627
- Location
- Seabeck, Washington
- Tractor
- Kubota BX-25D, Kubota Z122RKW-42
Exactly... I did the same. Each block was about 80lb so getting them close and same height was key! Luckily I had good access. It is also important when you are dealing with a lot of block... arrange to have the pallets placed in positions that allow you to access your work with your tractor. This takes a little thinking, believe it or not.
ultrarunner
Epic Contributor
- Joined
- Apr 6, 2004
- Messages
- 24,079
- Tractor
- Cat D3, Deere 110 TLB, Kubota BX23 and L3800 and RTV900 with restored 1948 Deere M, 1949 Farmall Cub, 1953 Ford Jubliee and 1957 Ford 740 Row Crop, Craftsman Mower, Deere 350C Dozer 50 assorted vehicles from 1905 to 2006
I did have a problem with my second delivery... driver said he was leaving the load on the street unlike what was promised.
I told him not to bother and I would get my block from another supplier.
Got in the truck and drove to the original supplier that did a great job with the first delivery and the supervisor told me the order was placed and apologized for the misunderstanding... new driver.
All the other orders went fine after that...
I told him not to bother and I would get my block from another supplier.
Got in the truck and drove to the original supplier that did a great job with the first delivery and the supervisor told me the order was placed and apologized for the misunderstanding... new driver.
All the other orders went fine after that...
OP
dragoneggs
Super Star Member
- Joined
- Jun 9, 2013
- Messages
- 13,627
- Location
- Seabeck, Washington
- Tractor
- Kubota BX-25D, Kubota Z122RKW-42
Also you don't want the full pallets too close to the wall where it interferes with the tractor. Because you surely aren't going to move them without a serious fork lift. I know some here have very high load capability with their FEL's but I was dealing with roughly 3500lb pallets I think. They pretty much stayed where they were dropped!
