My Ferguson Continental 135 engine cant find where to hook up the oil gauge line

[Knifer]

any Ideas where the oil port is?

 

[The kid]

any Ideas where the oil port is?

I happen to have a picture I took while working on mine.

The oil gauge line connection point is located just to the right of your battery negative post connection point to the frame on the right side of the tractor. Just to the left of the oil filter.

You should use a line wrench when loosening or tightening it. I would put a bit of teflon tape on it upon final assembly. When you hookup to the gauge you will need to bleed the line at the gauge while engine is running till you see oil comming from the line then tighten securely. If you don't. Your gauge will either not work right or be inaccurate. -robert

View attachment 285334

 

[Knifer]

thaanks