My baby dump trailer

   / My baby dump trailer #1  

BruceWard

Platinum Member
Joined
Sep 28, 2008
Messages
843
Location
Central, AR
The inside dimensions of the bed are 4'x7'

10031403-120.jpg


10031404-120.jpg


I bought a home made 4x7 trailer that was setup to tilt to load a four wheeler. It had 12" solid metal sides and a wooden floor. Then I added 2x12s to the top of the metal sides to increase capacity for light materials and decrease blowout of heavy materials. I also added some support the tongue and front of the trailer and added a 3 ton long bottle jack to dump the load. It has a 3500 pound capacity axle and springs. The original owner replaced the tires with some on 12" wheels. I found that 14" Ford Escort wheels fit the bolt pattern so I increased the size of the center hole on a set until they fit.

In the future I plan to remove the rust and repaint it, find some 14" truck tires for higher capacity and replace the one piece tailgate with a hinged two piece gate.

It moved roughly 3.5 yards of dirt for my daughters garden in 3 trips a few weeks ago. The dirt was wet so some of it stuck but it was much easier than shoveling it all!

So far I have about $400 invested in it.
 
   / My baby dump trailer #3  
Good build.

Chris
 
   / My baby dump trailer #4  
Nice build..just made projects that much easier.
 

Tractor & Equipment Auctions

2017 Ford F-150 4x4 Ext. Cab Pickup Truck (A51692)
2017 Ford F-150...
2013 John Deere 8360R MFWD Tractor (A53342)
2013 John Deere...
2019 Doosan LCV6W Towable LED Light Tower (A51691)
2019 Doosan LCV6W...
LOT NUMBER 251 (A53084)
LOT NUMBER 251...
New/Unused 7ft 20 Drawer Stainless Steel Workbench (A51573)
New/Unused 7ft 20...
44in Tooth Excavator Bucket (A51691)
44in Tooth...
 
Top