danielpw
New member
- Joined
- Dec 3, 2012
- Messages
- 15
- Location
- Near Great Basin Nat Park, Baker, NV
- Tractor
- 9540 Kubota, 30hp New Holland
Mulch is possible...
- Thread starter danielpw
- Start date
- Views: 2461
Piston
Elite Member
Is this a for sale ad?
Nice looking machine. I've never seen a PTO mulcher on that small of a tractor. That is really awesome! How does it handle the mulcher?
Nice looking machine. I've never seen a PTO mulcher on that small of a tractor. That is really awesome! How does it handle the mulcher?
Rustyiron
Super Member
That center pic. of the tractor and grapple on the ridge is cool!
Looking at it, I can't tell if it's hot or cold there. What ya clearing for?
Looking at it, I can't tell if it's hot or cold there. What ya clearing for?
OP
danielpw
New member
- Joined
- Dec 3, 2012
- Messages
- 15
- Location
- Near Great Basin Nat Park, Baker, NV
- Tractor
- 9540 Kubota, 30hp New Holland
The tractor is bigger than it looks... I replaced the 30" rims and tires with R4X24 rears, 18's up front to give me lower gears and better sidehill stability... note front tires backwards like motor grader for better steering and aggressive tread in reverse... runs straight and true on the road too... old Unimog trick. Ground speed is everything when mulching so the smaller tires and creepers allow me to do stumps too. I am quietly thinking of selling, my wife says it has to go... she doesn't think I should be in the tree business any more.
OP
danielpw
New member
- Joined
- Dec 3, 2012
- Messages
- 15
- Location
- Near Great Basin Nat Park, Baker, NV
- Tractor
- 9540 Kubota, 30hp New Holland
Nevada - Utah border 5 hours north of Vegas on US #50. Shred pinyon and juniper, cottonwood, poplar, sage, rabbitbrush, and lots of willow...
We are at 6,000 feet on the side of a 13,000 footer, about 20 degrees cooler than Vegas in the summer and way cold in the winter.
We are at 6,000 feet on the side of a 13,000 footer, about 20 degrees cooler than Vegas in the summer and way cold in the winter.
Piston
Elite Member
Daniel,
That setup you have there is just about my dream setup. Please don't PM me when your ready to sell...
That setup you have there is just about my dream setup. Please don't PM me when your ready to sell...
OP
danielpw
New member
- Joined
- Dec 3, 2012
- Messages
- 15
- Location
- Near Great Basin Nat Park, Baker, NV
- Tractor
- 9540 Kubota, 30hp New Holland
Like she said, it is time, Daniel. The tractor, shredder, grapple, materials bucket, pallet forks, snow plow and 14' utility trailer gotta go for 60K... 
nwterex
Bronze Member
Hey Dan Dave here great to see you on here long time not see.
OP
danielpw
New member
- Joined
- Dec 3, 2012
- Messages
- 15
- Location
- Near Great Basin Nat Park, Baker, NV
- Tractor
- 9540 Kubota, 30hp New Holland
Hi Dave,
Yes, long time. I was at the factory and, of course, saw Pam and Don... they look well and Pam seems to hold up well at the center of the Fecon universe... nothing happens without her approval!
My shredder threw a weight and needed balancing before I could sell it. And the factory is a better place for it to wait for a likely customer... it is a bit remote out here where I live!
So have a Merry O'l Christmas!
Dan
Yes, long time. I was at the factory and, of course, saw Pam and Don... they look well and Pam seems to hold up well at the center of the Fecon universe... nothing happens without her approval!
My shredder threw a weight and needed balancing before I could sell it. And the factory is a better place for it to wait for a likely customer... it is a bit remote out here where I live!
So have a Merry O'l Christmas!
Dan
