roadkingryder
New member
2850 will not move in forward or reverse. Any suggestions?
MT2850 wON'T MOVE
- Thread starter roadkingryder
- Start date
- Views: 1351
amaxwell
Gold Member
- Joined
- Sep 28, 2008
- Messages
- 397
- Location
- tennessee
- Tractor
- Cub Cadet-Yanmar ex450 -Ford 1300-Mahindra 2415
I had a John Deere 790 do that to me once,looked for a long time before I found the 4 wheel drive lever was accidently kicked half way between 2 and 4 wheel drive . Just one thing to check.
OP
roadkingryder
New member
I tried that, no bueno. Filled the hydraulic oils and still won't move. Think it might be the clutch?
oliver28472
Veteran Member
Does the pto work?
OP
roadkingryder
New member
Yes sir. The PTO works
I'm assuming 19 days later you figger'd something out.
mine did that once...after I had the trans cover off and back on...the knuckle head working on it (me) got things out of wack, and somehow stuck her in two gears at once. popped the cover again (not fun with blue rtv almost cured), and loosened things back up. presto-chang-o she goes!
also...the clutch storage arm isn't flipped around and holding the clutch pedal down is it?
mine did that once...after I had the trans cover off and back on...the knuckle head working on it (me) got things out of wack, and somehow stuck her in two gears at once. popped the cover again (not fun with blue rtv almost cured), and loosened things back up. presto-chang-o she goes!
also...the clutch storage arm isn't flipped around and holding the clutch pedal down is it?
