Motor specs on the 48" T-8 brush cutter?

   / Motor specs on the 48" T-8 brush cutter? #1  

KentT

Elite Member
Joined
Mar 31, 2005
Messages
2,928
Location
Sevierville, TN
Tractor
1993 Power Trac 1430 w/Kubota diesel engine
Anyone know what the specs are? Tried searching to no avail...

Mine is leaking at the shaft seal, after years of abuse and needs to be rebuilt or replaced. Likely could replace it from Surplus Center as cheaply as I could have it rebuilt. TIA...
 
   / Motor specs on the 48" T-8 brush cutter? #2  
If I recollect right, it was something like a 3 cuin motor.

With 8 GPM, speed = 616 rpm

---------------torque = 1432 in lbs or 119.3 ft lbs

Will develope about 14 HP.

Surplus Center
 
   / Motor specs on the 48" T-8 brush cutter?
  • Thread Starter
#3  
Thanks, JJ.
 
   / Motor specs on the 48" T-8 brush cutter? #4  
Danfoss: 3 cubic inch per rev.
 

Tractor & Equipment Auctions

New Paladin 30" Backhoe Bucket (A50775)
New Paladin 30"...
2003 Big Tex 10PI 16ft. T/A Pipe Top Utility Trailer (A55973)
2003 Big Tex 10PI...
Toro GreensMaster 1600 Walk-Behind Reel Mower (A53421)
Toro GreensMaster...
2025 GIYI VR66 Hydraulic 66in Vibratory Roller Skid Steer Attachment (A55787)
2025 GIYI VR66...
2018 KENWORTH T800 DAYCAB (INOPERABLE) (A53843)
2018 KENWORTH T800...
2006 Imperial 14Ft Flatbed T/A Equipment Trailer (A50324)
2006 Imperial 14Ft...
 
Top