drybar
New member
- Joined
- Mar 28, 2007
- Messages
- 7
- Location
- northern ideaho
- Tractor
- 8N fergieson/R3644 montana e/w loader
anyone have the color code for the montana green? have some implements that don't match.....need to color up.
montana color green
- Thread starter drybar
- Start date
- Views: 1574
gemini5362
Veteran Member
I dont have the color code but I bet if you take a small piece of paint off of the montana somewhere ( if you are like me you have already scuffed the loader arms somewhere) just get a flake and take it in to a paint store they can analyze it and make the color you want. I believe autmotive paint stores have that capability also.
Dallas_Lilly
Gold Member
Just last night I picked up a can from my dealer. He said that he got it from Montana and it was exactly what gemini5362 said it was, a can that was custom mixed.
OP
drybar
New member
- Joined
- Mar 28, 2007
- Messages
- 7
- Location
- northern ideaho
- Tractor
- 8N fergieson/R3644 montana e/w loader
alright............I'll just go out and knock a big hunk off of her and take in for the ACE man to analize....and mabey he can get a close match for the montana green.... need a quart to paint the blade I have...its a JD blade that has faded down to a cow pie color and it needs to get pretty and match the fancy little R3644 thats going to pull er'.....
thanks fellas...
thanks fellas...
gemini5362
Veteran Member
LOL Drybar you only need like a 1/4 inch spec to get a color. I believe they use a laser to illuminate it with. I have not done much painting with auto style paints but I have them color match house paint for me all the time and it does not take a very big piece for the machine to read it. Like I said if you are like me I have a couple of places on my FEL that have been scraped. When I get ready to repair those spots I will just make one of them a bit bigger to get the sample I needdrybar said:
bota7800
Gold Member
Isn't there some small part you can remove to use for color match. With airplanes is is easy, you take an inspection plate off to use but there should be a small part or a painted bolt or something. Or buy a spray can from the dealer. If it matches, use it to make a sample to get the larger amount of paint.
