Molded bungee hooks, so that's how they make those.

   / Molded bungee hooks, so that's how they make those. #1  

QRTRHRS

Elite Member
Joined
Nov 25, 2005
Messages
3,071
Location
The Bluegrass State
Tractor
None at this time.
I like to repurpose elastic bungee hooks. I usually buy the one's with wire hooks but had this one around with the heavy molded plastic hook covering where the elastic fastens. It was worn out so I took a saw to it to see what was what. Not worthy of much.

With the wire hook type, if I get a weak spot, I cut the elastic and secure it with a wire staple just like new. I use the poly/wire for electric fencing. I save the old wire hooks and as demonstrated in my photo, loop the wire rope through instead of gate handles for temporary fencing, etc.

20251011_135637.jpg
 
   / Molded bungee hooks, so that's how they make those. #2  
I like to repurpose elastic bungee hooks. I usually buy the one's with wire hooks but had this one around with the heavy molded plastic hook covering where the elastic fastens. It was worn out so I took a saw to it to see what was what. Not worthy of much.

With the wire hook type, if I get a weak spot, I cut the elastic and secure it with a wire staple just like new. I use the poly/wire for electric fencing. I save the old wire hooks and as demonstrated in my photo, loop the wire rope through instead of gate handles for temporary fencing, etc.

View attachment 4232020
I keep a supply of those hooks around:

1760270421686.png



Like you, I cut out the weak spot in the damaged bungee and put a hook on either end to make two shorter bungees. I hook them together if I want the same original length.

Bungees used to be cheap as dirt, but like everything else, the prices are going up. Makes perfect sense to repurpose or repair them.
 
   / Molded bungee hooks, so that's how they make those. #3  
When I actually ran a lot, I used to find bungee cords and S-hooks on the road constantly. Unfortunately, many of the bungee cords were either broken, or missing a hook.

So I would pick them all up, throw away the broken bungees and keep the hooks for the ones that were missing. I sill have a big enough collection that I may never need to buy any more....
 
   / Molded bungee hooks, so that's how they make those.
  • Thread Starter
#4  
While driving one day, I started seeing rubber bungee's on the road. I came up behind a flatbed that had several still hanging on his DOT bumper where had staged them at his last drop.

He was not too happy with himself when I told him over the CB.
 

Tractor & Equipment Auctions

2018 KENWORTH T880 DAYCAB (A53843)
2018 KENWORTH T880...
2018 JCB Truss Jib Telescopic Hydraulic Boom (A53421)
2018 JCB Truss Jib...
2018 John Deere XUV560E 4x4 Gator Utility Cart (A55787)
2018 John Deere...
2022 BMW X7 xDrive40i AWD SUV (A55758)
2022 BMW X7...
Jack Daniels Metal Trucks (A53316)
Jack Daniels Metal...
1999 Ford F-450 Mason Dump Truck (A55788)
1999 Ford F-450...
 
Top