Loader Model M22

   / Model M22 #1  

tims0566

New member
Joined
Apr 23, 2011
Messages
3
Tractor
MF 135
I just bought a small hobby farm and it has a MF tractor (SN#9A-877I7) and a M22 front end loader. I was trying to find the year and what hydraulic oil is in the loader.
 
   / Model M22 #2  
OK....What you have is a 1970....something.... US built Massey Fergusons of that era shared a common serial number sequence all the way through the model line. Long story short, it could be a 135, a 150, a 165, a 175, or a 180. (or one of several industrial models)

But it IS a 1970 model.

What engine? (3-cyl? 4-cyl?, gas or diesel)


OK again.... Is the loader plumbed into the tractors hydraulics (common oil sump) or does it have it's own pump and res.?

Just from own experience, I've ran Pennzoil HyTran in my Massey Fergusons for many years without the first issue.
 
   / Model M22
  • Thread Starter
#3  
It has a seperate pump attached to front of engine and the right assembly that has the lever controls is the tank and filter. I would like to know where or what filter is needed.

Is there any way to know exactly what model I have as I want to get tune up / other parts. (I.E. Alternator) as it has a starting problem. Battery is not being charged or a short that is draining battery. I haven't had a lot of time to inspect.

It is a three cylinder diesel. I know it's a perkins

Also My Uncle has changed the common sump PTO lever with a three way valve. Unsure what he meant, but the lever being pushed forward kills flow and pump dissenigrates, stick straight up allows 3 point lift to work, and rear puts pump into no flow. Has any one heard of this? I looked in the service manual, but this is not listed.
 
   / Model M22 #4  
It has a seperate pump attached to front of engine and the right assembly that has the lever controls is the tank and filter. I would like to know where or what filter is needed.

Is there any way to know exactly what model I have as I want to get tune up / other parts. (I.E. Alternator) as it has a starting problem. Battery is not being charged or a short that is draining battery. I haven't had a lot of time to inspect.

It is a three cylinder diesel. I know it's a perkins

Also My Uncle has changed the common sump PTO lever with a three way valve. Unsure what he meant, but the lever being pushed forward kills flow and pump dissenigrates, stick straight up allows 3 point lift to work, and rear puts pump into no flow. Has any one heard of this? I looked in the service manual, but this is not listed.

3-cylinder Perkins diesel narrows things down considerably. Probably a 135, 150 or a couple possibilities as far as industrial tractors

What transmission does it have?
 
   / Model M22
  • Thread Starter
#5  
3 speed & Hi / Lo lever.

As for PTO pump control that is below seat between legs, It also has on/off for PTO operation
 

Tractor & Equipment Auctions

2008 Dodge Ram 1500 (A50515)
2008 Dodge Ram...
2007 FREIGHTLINER BUSINESS CLASS M2 DUMP TRUCK (A51406)
2007 FREIGHTLINER...
2015 FREIGHTLINER (A50323)
2015 FREIGHTLINER...
2006 Mack CT713 Granite T/A Roff-Off Truck (A50323)
2006 Mack CT713...
FAE UML/SSL 150 VT BL HYD MULCHING HEAD (A51243)
FAE UML/SSL 150 VT...
2015 Frieightliner M2 (A50323)
2015 Frieightliner...
 
Top