MegaRamps on 20' Trailer

[Bennesh1]

I'm looking at a 20' 14K trailer to haul my Kioti CK2610 w front end loader and 5' bushog. Anyone have experience with this setup on a 20' trailer with the mega ramps? I've seen plenty of reports saying 20' is a good trailer length but didn't know if these ramps that lay flat work well with hauling a tractor.

 

[4570Man]

My trailer has mega ramps. I like that I can load any piece of equipment without having to slide ramps together. The approach angle is the best I’ve ever had with a deckover trailer. The downside is they’re heavy and the load has to fit completely on the trailer. With split ramps a backhoe boom or bushhog tail wheel can stick off the end a little bit. With the mega ramps that’s mostly not possible.

 

[Mrsig]

and enjoy the forum!

 

[WM75Guy]

Welcome to TBN. I have a Big Tex 14GN 20+5 (25') trailer with Mega ramps. I carry all my tractors, CTL, and hay on it without any issues. The ramps can either lay flat on the 5' dovetail or be pinned upright. With a dovetail it does scrape occasionally on uneven roads. When I had a 20' trailer my TC40DA with 6' cutter would stick out over the rear, no way to move it forwards or back to balance the load. With your tractor and 5' cutter it will probably fill the trailer with a little room for balancing the load. That is why I have the 25' trailer now, more room to balance the load to get the correct tongue weight.