massey 1552 will not move

[BCL2]

I have a massey ferguson 2008 with a power shuttle DQS transmission that will not move, PTO does not work. Any suggestions where to start. Engine runs fine

Just a little history, had to replace the cam shaft and associated gears so separated the tractor, broke the motor down, replaced damaged parts and put it back together. Motor started right up and runs great. However, all the dash indicators show the gears are shifting and PTO is engaged but nothing happens. I have changed all the fluid and filters, still nothing.

I am really scratching my head on this one. Anyone have any similar problems or suggestions?

 

[oldnslo]

Bcl
I am not familiar with your tractor but my first thought is to double check the hydraulic pump that feeds the shuttle shift and PTO is connected properly. Possibly a line or fitting is not connected properly after splitting the tractor.
If the PTO and shift are electric operated double check all of the wiring and if possible verify that you are getting a signal to the coils that control the PTO and shuttle shift.

Also might help to post this question in the Massey section of this forum