Marking chain length

   / Marking chain length #1  

AlanB

Elite Member
Joined
Jan 2, 2004
Messages
2,550
Location
Clarksville, TN, USA
Tractor
NH 1925
I have just bought a new dump trailer, it uses 1/4" chain to make the tailgate work, slide it into the slot and let it drop like the old style pickups, or, slide it in the other slot and open the bottom like a dump truck.

It uses about 3' of chain on either side.

I would like to mark the chain so that I can set both sides equally, without counting or much fuss.

My thought was to paint one link of every 5 or so a different color. You would count in 5 and paint it say, Red, then count in another 5 and paint it green, count in another 5 and paint it say Blue.

I realize the paint will wear off (but suspect you will see traces for a long time)

I would rather not attach something permanent to the chains as they have to slip in the slots of the holding devices.

Better ideas or words of wisdom and experience?
 
   / Marking chain length #2  
AlanB said:
I have just bought a new dump trailer, it uses 1/4" chain to make the tailgate work, slide it into the slot and let it drop like the old style pickups, or, slide it in the other slot and open the bottom like a dump truck.

It uses about 3' of chain on either side.

I would like to mark the chain so that I can set both sides equally, without counting or much fuss.

My thought was to paint one link of every 5 or so a different color. You would count in 5 and paint it say, Red, then count in another 5 and paint it green, count in another 5 and paint it say Blue.

I realize the paint will wear off (but suspect you will see traces for a long time)

I would rather not attach something permanent to the chains as they have to slip in the slots of the holding devices.

Better ideas or words of wisdom and experience?

I have an A-frame engine hoist that I use to load and unload a few things from my truck and/or trailer. after repeatedly hooking and REhooking chains on the same items (to be lifted), I did something simular. I used cable ties on various chain links. They stay in place better than paint.
 
   / Marking chain length #3  
Both great ideas.

I use colored zip ties on hoses on aux remotes and laoder controlls to make sure I get the correct hose back into the correct port.

Soundguy
 

Tractor & Equipment Auctions

1990 Ford F800 7 Yd. S/A Dump Truck (A48081)
1990 Ford F800 7...
NEW 2024 LOAD TRAIL 83IN X 14FT Tandem Axle Dump Low-pro Trailer (A51039)
NEW 2024 LOAD...
2020 CATERPILLAR 259D3 SKID STEER (A51242)
2020 CATERPILLAR...
7022 (A50322)
7022 (A50322)
1985 International X Con Semi (A50514)
1985 International...
2017 Bad Boy Outlaw XP 61in Zero Turn Mower (A48082)
2017 Bad Boy...
 
Top