Markham
- Thread starter Doc_Bob
- Start date
- Views: 3977
Oleozz
Veteran Member
- Joined
- Jan 14, 2006
- Messages
- 1,656
- Location
- Pa.
- Tractor
- International 1066 with Year Round Cab, Kioti DK 45S with Cab, 451 Loader
You might be in for a long wait with those folks. I finally cancelled my order after five weeks, bought from United Steel Works that sells on ebay and it is a good toothbar.
Oleozz
Veteran Member
- Joined
- Jan 14, 2006
- Messages
- 1,656
- Location
- Pa.
- Tractor
- International 1066 with Year Round Cab, Kioti DK 45S with Cab, 451 Loader
You might be in for a long wait with those folks. I finally cancelled my order after five weeks, bought from United Steel Works that sells on ebay and it is a good toothbar.
Oleozz
Veteran Member
- Joined
- Jan 14, 2006
- Messages
- 1,656
- Location
- Pa.
- Tractor
- International 1066 with Year Round Cab, Kioti DK 45S with Cab, 451 Loader
www.markhamwelding.com. I forgot to answer your question.
Oleozz
Veteran Member
- Joined
- Jan 14, 2006
- Messages
- 1,656
- Location
- Pa.
- Tractor
- International 1066 with Year Round Cab, Kioti DK 45S with Cab, 451 Loader
www.markhamwelding.com. I forgot to answer your question.
GeneD14
Veteran Member
- Joined
- Jul 29, 2003
- Messages
- 1,458
- Location
- Tennessee
- Tractor
- Kubota B26 TLB, Allis Chalmers D17 series IV, Kubota ZG-23 Mower, Kubota ZD 1211, Kawasaki Mule 610, Stihl 361, Stihl 045 AV Super, and a Stihl 660 Ported and tuned
</font><font color="blue" class="small">( You might be in for a long wait with those folks. I finally cancelled my order after five weeks, bought from United Steel Works that sells on ebay and it is a good toothbar.
)</font>
What's up with Markham's long lead time? They shipped to me within a few days all the way up to MI. That was almost 2 years ago. I wonder why it is taking them longer now? /forums/images/graemlins/confused.gif
)</font>
What's up with Markham's long lead time? They shipped to me within a few days all the way up to MI. That was almost 2 years ago. I wonder why it is taking them longer now? /forums/images/graemlins/confused.gif
GeneD14
Veteran Member
- Joined
- Jul 29, 2003
- Messages
- 1,458
- Location
- Tennessee
- Tractor
- Kubota B26 TLB, Allis Chalmers D17 series IV, Kubota ZG-23 Mower, Kubota ZD 1211, Kawasaki Mule 610, Stihl 361, Stihl 045 AV Super, and a Stihl 660 Ported and tuned
</font><font color="blue" class="small">( You might be in for a long wait with those folks. I finally cancelled my order after five weeks, bought from United Steel Works that sells on ebay and it is a good toothbar.
)</font>
What's up with Markham's long lead time? They shipped to me within a few days all the way up to MI. That was almost 2 years ago. I wonder why it is taking them longer now? /forums/images/graemlins/confused.gif
)</font>
What's up with Markham's long lead time? They shipped to me within a few days all the way up to MI. That was almost 2 years ago. I wonder why it is taking them longer now? /forums/images/graemlins/confused.gif
onsight
Bronze Member
Hi Doc Bob
You might also want to try Berlon Industries as a WI local manufacturer. They are located in Hustisford, and make lots of neat attachments.
Ken
You might also want to try Berlon Industries as a WI local manufacturer. They are located in Hustisford, and make lots of neat attachments.
Ken
onsight
Bronze Member
Hi Doc Bob
You might also want to try Berlon Industries as a WI local manufacturer. They are located in Hustisford, and make lots of neat attachments.
Ken
You might also want to try Berlon Industries as a WI local manufacturer. They are located in Hustisford, and make lots of neat attachments.
Ken
</font><font color="blue" class="small">( Hi Doc Bob
You might also want to try Berlon Industries as a WI local manufacturer. They are located in Hustisford, and make lots of neat attachments.
Ken )</font>
I will do just that and thanks for letting me know.
Bob
You might also want to try Berlon Industries as a WI local manufacturer. They are located in Hustisford, and make lots of neat attachments.
Ken )</font>
I will do just that and thanks for letting me know.
Bob
</font><font color="blue" class="small">( Hi Doc Bob
You might also want to try Berlon Industries as a WI local manufacturer. They are located in Hustisford, and make lots of neat attachments.
Ken )</font>
I will do just that and thanks for letting me know.
Bob
You might also want to try Berlon Industries as a WI local manufacturer. They are located in Hustisford, and make lots of neat attachments.
Ken )</font>
I will do just that and thanks for letting me know.
Bob
Sent Markham a check for a toothbar last week. Some of the problem is getting enough teeth to fill demand, they fill orders until they run out of teeth then they have to wait for more.
I can wait on them! /forums/images/graemlins/wink.gif
I can wait on them! /forums/images/graemlins/wink.gif
Sent Markham a check for a toothbar last week. Some of the problem is getting enough teeth to fill demand, they fill orders until they run out of teeth then they have to wait for more.
I can wait on them! /forums/images/graemlins/wink.gif
I can wait on them! /forums/images/graemlins/wink.gif
Casey1
Bronze Member
I waited 7 weeks for Markham and finally cancelled my order. Got my tooth bar from United Steel Works also. Very tough toothbar.
Casey1
Bronze Member
I waited 7 weeks for Markham and finally cancelled my order. Got my tooth bar from United Steel Works also. Very tough toothbar.
texbaylea
Veteran Member
- Joined
- Feb 6, 2004
- Messages
- 1,932
- Location
- Brazos County Texas 77808
- Tractor
- Kubota L3130HST w/LA723 loader
Guys
I think what is happening with Markham happens to a lot of small businesses who do good work. They suddenly get noticed and then get more business than they can easily handle.
They have gotten a lot of good reviews here on TBN which they deserve and therefore have gotten more business. If they are having to import the teeth then there are long lead times involved.
If their delivery time is longer than you can accept then buy from some one else but don't "bad mouth" them
I prefer dealing with small companies that have time to talk to me and work out any problems.
Thanks for letting me rant a bit
Vernon
I think what is happening with Markham happens to a lot of small businesses who do good work. They suddenly get noticed and then get more business than they can easily handle.
They have gotten a lot of good reviews here on TBN which they deserve and therefore have gotten more business. If they are having to import the teeth then there are long lead times involved.
If their delivery time is longer than you can accept then buy from some one else but don't "bad mouth" them
I prefer dealing with small companies that have time to talk to me and work out any problems.
Thanks for letting me rant a bit
Vernon
texbaylea
Veteran Member
- Joined
- Feb 6, 2004
- Messages
- 1,932
- Location
- Brazos County Texas 77808
- Tractor
- Kubota L3130HST w/LA723 loader
Guys
I think what is happening with Markham happens to a lot of small businesses who do good work. They suddenly get noticed and then get more business than they can easily handle.
They have gotten a lot of good reviews here on TBN which they deserve and therefore have gotten more business. If they are having to import the teeth then there are long lead times involved.
If their delivery time is longer than you can accept then buy from some one else but don't "bad mouth" them
I prefer dealing with small companies that have time to talk to me and work out any problems.
Thanks for letting me rant a bit
Vernon
I think what is happening with Markham happens to a lot of small businesses who do good work. They suddenly get noticed and then get more business than they can easily handle.
They have gotten a lot of good reviews here on TBN which they deserve and therefore have gotten more business. If they are having to import the teeth then there are long lead times involved.
If their delivery time is longer than you can accept then buy from some one else but don't "bad mouth" them
I prefer dealing with small companies that have time to talk to me and work out any problems.
Thanks for letting me rant a bit
Vernon
