rmully
Gold Member
Who sells good manuals both user and parts/repair?
Manuals
- Thread starter rmully
- Start date
- Views: 4579
I bought manuals along with my 3810D from RCO tractors in Austin Texas you might give them a try or there are several other dealers around.
You may not get the exact one if its a gray market but there is a chance there was a US market tractor that's close and will work good enough that's what I had to do.
Steve
Gale Hawkins
Super Member
- Joined
- Sep 20, 2009
- Messages
- 8,268
- Location
- Murray, KY
- Tractor
- 1948 Allis Chambers Model B 1976 265 MF / 1983 JD 310B Backhoe / 1966 Ford 3000 Diesel / 1980 3600 Diesel
Ebay has worked 100% of the time for us.
YanmarFever
Elite Member
- Joined
- Mar 10, 2002
- Messages
- 3,373
- Location
- Eating a melon..
- Tractor
- Mahindra 5010C- Branson 4520r- 5520C- Yanmar FX235-D - Bad Boy rogue mower
There are many dealers selling manuals out there....:confused2:
http://www.hoyetractor.com/ not only made their own manuals , but they sell more than all the other dealers combined.:thumbsup:
http://www.hoyetractor.com/ not only made their own manuals , but they sell more than all the other dealers combined.:thumbsup:
OP
rmully
Gold Member
Well I bought this Murry Publishing manual and it is not very good. Full of filler information just to make it look like a manual, more than 1/2 the manual. Many of the pages have been copied so many times it is hard to make out what is printed on it. Any other manuals out there ??
C
careyo63
Guest
You can try Fredricks In AL. They are the biggest for our area.
OP
rmully
Gold Member
Thanks Carey ... LOL that is who I bought this manual from
normde2001
Elite Member
- Joined
- Mar 10, 2002
- Messages
- 4,163
There probably is no better service manual for your tractor. The best you can hope for is a manual with the same engine, for specs, etc. You should get an OEM Japanese parts manual for the pictures and part #'s. You are pretty much on-your-on with a gray market tractor.
clemsonfor
Super Member
is that the one Arron at hoye wrote as well?
OP
rmully
Gold Member
Not sure but is is a poor job at best... sorry but i have worked in publishing for a long time and this manual looks like a high school project at best. I am not meaning to step on any toes but I guess since this is all there is I will just use the spec info.
