Manuals

[rmully]

Who sells good manuals both user and parts/repair?

 

[Car Doc]

Who sells good manuals both user and parts/repair?

I bought manuals along with my 3810D from RCO tractors in Austin Texas you might give them a try or there are several other dealers around.

You may not get the exact one if its a gray market but there is a chance there was a US market tractor that's close and will work good enough that's what I had to do.

Steve

 

[Gale Hawkins]

Ebay has worked 100% of the time for us.

 

[YanmarFever]

There are many dealers selling manuals out there....:confused2:

http://www.hoyetractor.com/ not only made their own manuals , but they sell more than all the other dealers combined.:thumbsup:

 

[rmully]

Well I bought this Murry Publishing manual and it is not very good. Full of filler information just to make it look like a manual, more than 1/2 the manual. Many of the pages have been copied so many times it is hard to make out what is printed on it. Any other manuals out there ??

 

[careyo63]

You can try Fredricks In AL. They are the biggest for our area.

 

[rmully]

Thanks Carey ... LOL that is who I bought this manual from

 

[normde2001]

Thanks Carey ... LOL that is who I bought this manual from

There probably is no better service manual for your tractor. The best you can hope for is a manual with the same engine, for specs, etc. You should get an OEM Japanese parts manual for the pictures and part #'s. You are pretty much on-your-on with a gray market tractor.

 

[clemsonfor]

is that the one Arron at hoye wrote as well?

 

[rmully]

is that the one Arron at hoye wrote as well?

Not sure but is is a poor job at best... sorry but i have worked in publishing for a long time and this manual looks like a high school project at best. I am not meaning to step on any toes but I guess since this is all there is I will just use the spec info.