Makita (Dolmar) Clutch drum parts help. EA 7300P
- Thread starter mastercraftka
- Start date
- Views: 1206
RandyT
Elite Member
The clutch drum part number is 957 223 092. Dolmar/Makita doesn't have a lot of aftermarket part following so may have to find OEM. If the drum isn't damaged should be able to just replace the rim
- Joined
- Feb 21, 2003
- Messages
- 26,656
- Location
- SE Michigan in the middle of nowhere
- Tractor
- Kubota M9000 HDCC3 M9000 HDC
Mot sure but Sawzilla might.
OP
mastercraftka
Silver Member
Ya bearing are good the teeth are not good anymore
RandyT
Elite Member
Usually occurs with the rim is allowed to wear down past its usable point, and the chain drive links eat into the main spline housing.
OP
mastercraftka
Silver Member
It is a two piece and the sprocket disintegrated.
TMGT
Elite Member
SLE equipment has them for a decent price, I've ordered from them before, they usually have decent prices on Dolmar/Makita parts.
sleequipment.com
Makita Genuine Part 957-223-092 CLUTCH DRUM CPL., DCS6401
957-223-092 - SLE Equipment is a full line Distributor and carries 99% of all lines in the outdoor power equipment industry. Our search can be utilized to find parts for outdoor equipment from the top manufacturers in lawn equipment.
sleequipment.com
Are you saying you just need the replaceable sprocket rim? Not a clutch drum the rim goes on?
If so only like 5 bucks and 3/8 7t standard aka large prob what you have on there.
OP
mastercraftka
Silver Member
correct thanks
Can get oem or aftermarket. Standard 3/8 7T about anywhere.
Just go to local dealer. There they might get you for 10-15 sometimes for oem ones.
Power Mate® Rim Sprocket System, 3/8" 7 Standard 7 | Oregon Products
The most effective sprocket for all types of chain saw users. Get product specs and fit up info for this 3/8 inch pitch, 7 standard 7 sprocket at OregonProducts.com.
